razor, before you release the update can you please fix the "system check"?

because doesnt work

i've set the processor to 4 cores and 2400 MHz + 6GB of ram ( 6144 mb )

and my processor is only 2 core and 2.6GHz + 4gb of ram

but the "system" still showing 10/10 o.o

here the picture ( not actually recommended specs from official )

sorry for my bad english :D

__

german Translation
 

ok, fixed.

may have forgotten this

eng.CreditsMessage1_1=Credits
eng.CreditsMessage2_1=This installation was built with %1.
eng.CreditsMessage2_2=%1 created by %2
eng.CreditsMessage2_3=Installation created by %1

albanian

bug.
 

see that radio button. both are selected. even if i click jpg it ask me to jpg bmp and png, for png it ask me jpg bmp and jpg. fix it.

new idea..

add recent document to ic :)
if you load or open the icp file then ic saved in reg entry
add drop down menu and read the reg entry
when we need the recent document we can get it from drop down menu.

how is it :D:rolleyes::p

Who ever like my idea, give a thanks to my post so razor12911 will update this feature. :D :D

http://img845.imageshack.us/img845/2541/xzsc.jpg

a place to put the files. ico to put on the autorun.exe or setup.exe;)

Great idea. Ok, anyone else wanna request a feature, just post what you want as long as its possible to create

:eek:you are a great
;):D

Installer Creator v1.2.0.1 Update Available

Just run the icu file then Installer Creator will start update process, or just update online

:rolleyes: also put the guide would not hurt! and only a Suggested :cool::p

I added tutorials and I think the rest is general intel.

Fix v1.2.0.2 Pending

hi, i dont know why but i cant use the installer creator :-(
here's some screenshots.

Amazing work btw
http://imageshack.com/a/img19/3315/8rag.jpg
http://imageshack.com/a/img850/8859/eob5.jpg

does that happen everytime when you launch the create project form?

by the way, what are your system specs?

:confused::confused:

I don't know why, but since Version 1.2.0.0 I can't Compile anything (Internal Compression)! IC begins with Compiling and ends after 3 seconds.

By the Way, got anybody Version 1.1.0.0 for Download? This was the last good working Version for me.

will check it out

yes everytime i launch the program.
cant do anything.

my system specs are:
i7-3930k cpu 3.20ghz
ati radeon hd 7990
16 gb ram
windows 7 64 bit

I guess, I'll have to prepare 32 and 64 - bit Installer Creator for compatibility support

but why does error complain about a dll which is something like ati...

did you install direct x?

DX9 and DX10 must be installed.

so you mean that 64 bit isnt supported?

yes i too find it realy strange and yes a have dx installed.

64 bit is supported.

My System Specs are:

Intel(R) Core 2 Duo E7500
4GB RAM
ATI HD 5450
Windows 8.1 Enterprise (64-Bit)

It's just that I don't know what's wrong.

Private Message me mate so that we can solve problem via Team Viewer.

@Inge:

I did internal compression and it works.

Hm, any reason why it not works for me?
Other Issues are:
The icons for autorun and setup.exe does not shown (like in your Picture), I set an Icon and it's on default (a little Computer) after Compile since version 1.1.0.0.
if I Load an Project the Lang Ukraine and the Icon Window is empty, the small Installer are always on default settings and the small Installer always shows 2 Buttons (minimize and close) which cannot be Modified.

Since the Internal Compression does not Work on my PC I use your Quick Archive Packer for Compile. That helps a bit.

My Rig:
Athlon IIx3
4GB Ram
Geforce GT 640
Win7 Ultimate (x64)

Version may be false.
Never use special characters especially these ones [# and ']

like for example Tom Clancy's Splinter Cell

Icons are fixed but update was delayed.

for the close and minimize button, you must load png and bmp else you'll never modify those.

thanks for fixing icon.
about close and minimize i kinda doenst like that feature :p

just an a idea, can u add "Split/Slice" feature on "FreeArc"? :D

and i have question about some feature u add in 1.2.x.x version
about "DIALOG background and img" can you explain it to me?

btw how to update my IC to 1.2.1.0? when i click Update.exe in Installer creator folder it said "installer creator is outdated and can no longer update"

===edit===

can u add "support video" feature? when installing progress?

French Translation
 

Hey Razor, your installer creator is really awesome! I noticed French translation is not implemented yet. So here’s my small contribution to your great job
--By the way, I tried to test this by injecting it in the InstallerScript and adding a French input in the setup.ini but that doesn’t work:mad:. If there is any chance to test a translation without code change, give me a push in the right direction
--EDIT: Sound installer creator doesn't call the InstallerScript file. I compiled it with Inno Setup and that's ok

update was kinda late.

I can add video but I have to figure out a way of detecting if video has stopped so that slides can proceed and if there are no slides, video must repeat.

psyLOw, thanks for French translation.

and I need about 5 to 10 people with the following operating systems.

Windows XP is outdated and I don't think it supports Direct X 10 onboard.

Windows Vista, Any Service Pack x86 and x64

Windows 7, Any Service Pack x86 and x64

Windows 8 x86 and x64

I wanna test a function I built of detecting a whether the running application is 32 or 64 bit to receive correct update since I'm planning on 32 and 64-bit Installer Creator application for full compatibility.

my system are Windows 8 x64
i can test it for you

ok, just check your PM in a few minutes.

I can try and test it. I am running Win7 x64.
BTW, I am not found of online updates because of various issues that usually results in: FW change, security flaw, etc. I hope you will maintain download update …

the new version is 1.2.1.0 but I didn't upload the update package, :D only the info that it is there.

anyway. this is what you should test.

https://app.box.com/s/44dkfrpv9vm3t3onzpxl

look at the image inside attachment

run 32-bit exe and 64-bit exe, Look in the about page.

one of them must be Installer Creator (32-Bit) and the other must be Installer Creator (64-Bit)

Icon not work
 

Razor, the icon not work for me. Same Inge at #468

http://i.minus.com/ibxryvAkV9jLUl.jpg

After compile
http://i.minus.com/i7Smh0vZZIVxs.jpg

yea, I haven't updated it yet because tests are pending.

Here is my feedback regarding r1.2.10 with Win7 x64
64-bit flavor

-Installer Creator (64-Bit) is displayed in the application field of the about window

-Except remarks above nothing to report

32-bit flavor

-Installer Creator (32-Bit) is displayed in the application field of the about window

-Windows error message box when the IC is closed: that program may be not setup correctly… [Install again with recommended settings or that program is installed correctly] (rough translation)

Now here my suggestions or problems I noticed with 1.2.1.0 or/and 1.2.0.1
Bugs/problems

[1.2.1.0 or/and 1.2.0.1] The FreeArc compression doesn’t work with –mprecomp+srep(64)+delta+lzma method. The cmd line windows is opened / closed very quickly. No time to read what is the problem.
I used your compress.exe to generate the archive that kind of archive but in that case the installer fails to deflate it.

[1.2.0.1 and certainly 1.2.1 based on InstallerScript.iss inspection] The GDF file registering in Window game explorer fails. Based on my InstallerScript.iss inspection, there is a mismatch between setup.ini keys (Launcher1Binary) and script that looks for: LauncherBinary and doesn’t check Launcher2Binary.

Suggestions/recommendations
------------------------------
I don’t really like the message boxes that ask for disk swap when an archive is not found on the disk. I would prefer the Inno Setup flavor that lets you chance to point another location with a browse button.

But my major recommendation is please let us customize the installer generated by IC. I mean that would be very useful to have access to the script created by IC just before the compilation. Thus, we could modify some stuff and detect bug in the created script.
I’d like to use IC as a super ISTool: it would help to create very quickly and without error nice installer but let us tune it for our personal needs.

Thanks

will check out the GDF and we'll see how to deal with the disk prompt dialog for location change.

[Changes]
GDF Binary fixed

About Timer slider
 

Razor, can you edit script to set timer between the slides on total installation process.
(For example: The process installation is 10 minute and I have 10 images. So timer to slide from image 1 to image 2 = 1 minute. And if i have 20 images => timer to slide is 30 seconds). Summary, when process installation finish => the slide images finish also (similar with timer slide in CIU by yener09).

Sorry for my bad english and using google translation :D

not actually going to do it via progress like yener90, not copying anyones stuff or ideas. I'm **** pissed, will update IC and do my last conversion.

ic of razor is much more advanced