PDA

View Full Version : Mad Max 1xDVD5 CIUV2

Simorq
24-08-2017, 10:22
Setup Script (CIUv2) By Yener90.
Thank You BAMsE; Razor12911; Kaktor; Chayan Manna; LuisCésar82 For Script Editing
Thanks to altef_4 For PNGtoBMP Converter.

Special Thanks to Houcine80 (http://fileforums.com/member.php?u=208139) For His Setup Design.
Special Thanks to Razor12911 For His ZTool pZlib3.


UltraARC By: Razor12911.
Modified By: Simorq (UltraARC R3)

Method=MASK (MaskI=SRARC/$deflate=pZlib3+SREP+LZMA)

http://s8.picofile.com/file/8304503542/MAD_MAX_1xDVD5_CIU2.jpg
Simorq
26-08-2017, 08:01
[QUOTE=ramazan19833;461984]Mad Max Error Help....

What is your CPU specification?
Which setup did you use?
KaktoR
02-05-2018, 15:24
Here is 1xDVD5 with xtool.

Compression time: ~4 hours (4 cores)
Extract time: 30 minutes
final size: 3.96GB
tested with origin version

without redist
without __Installer folder

but should fit with redist + __Installer folder too

Using diskspan 2 data.bin (Data1 for *.arc, Data2 for rest)

Setup.exe should be updated with CIUv2 U14 (include 7zip x64 + xtool x64)

Tested with arc.ini inside CIU
[External compressor:xprecomp]
header = 0
unpackcmd = xtool.exe d:precomp:t75p - - <stdin> <stdout>

All is fine :)
masen485
03-05-2018, 00:06
Mad Max
Setup.exe ?
Setup.exe source ?
KaktoR
03-05-2018, 08:57
I have added Setup.exe to my previous post.
masen485
03-05-2018, 10:09
Mad Max Setup.exe source project required
Stor31
04-05-2018, 04:55
KaKtoR
https://nsa39.casimages.com/img/2018/05/04/180504020215979238.png
KaktoR
04-05-2018, 05:01
Check with new attachment (somehow i forgot to include srep).
Stor31
04-05-2018, 07:25
KaKtoR : compression OK ..
https://nsa39.casimages.com/img/2018/05/04/180504043252100142.png
Thx
KaktoR
04-05-2018, 07:29
Good. I think it is with redist + __Installer folder?

Because of size :)
Stor31
04-05-2018, 08:28
No Because this version Mad Max – v1.0.3.0 + All DLCs (32,8 Go) ;) (Based on Mad.Max.Road.Warrior-)
Installation Ok ;)
MM32
10-06-2018, 15:07
Here is 1xDVD5 with xtool.

Compression time: ~4 hours (4 cores)
Extract time: 30 minutes
final size: 3.96GB
tested with origin version

without redist
without __Installer folder

but should fit with redist + __Installer folder too

Using diskspan 2 data.bin (Data1 for *.arc, Data2 for rest)

Setup.exe should be updated with CIUv2 U14 (include 7zip x64 + xtool x64)

Tested with arc.ini inside CIU
[External compressor:xprecomp]
header = 0
unpackcmd = xtool.exe d:precomp:t75p - - <stdin> <stdout>

All is fine :)

Need this script please
pakrat2k2
11-06-2018, 07:36
Need this script please

here

http://www.fileforums.com/showthread.php?t=99227
MM32
11-06-2018, 15:39
here

http://www.fileforums.com/showthread.php?t=99227

It is not what I want
I want like Mad.Max.1xDVD5
https://i95.servimg.com/u/f95/18/15/28/91/110.png
pakrat2k2
11-06-2018, 19:13
It is not what I want
I want like Mad.Max.1xDVD5
https://i95.servimg.com/u/f95/18/15/28/91/110.png

the link i gave you, create your own !!
houcine80
12-06-2018, 03:03
the link i gave you, create your own !!

I think he's looking for the method of compression
MM32
12-06-2018, 03:28
the link i gave you, create your own !!

Script does not work with this command
xprecomp+srep+lzma:a1:mfbt4:d256m:fb273:mc10000000 00:lc8+diskspan:4448mb:4470mb

While it works Mad.Max.1xDVD5
xprecomp+srep+lzma:a1:mfbt4:d256m:fb273:mc10000000 00:lc8+diskspan:4448mb:4470mb

See for yourself
I pressed a small file for the experiment
https://my.pcloud.com/publink/show?code=XZazUu7ZpfpCjOgFgrY8CA0qkpai9z0qM4hX
KaktoR
12-06-2018, 06:27
Because xtool is not included in Setup.exe
MM32
12-06-2018, 13:54
Because xtool is not included in Setup.exe

I want to get your own script
Thank you very much
https://i95.servimg.com/u/f95/18/15/28/91/110.png
pakrat2k2
20-06-2018, 16:14
Here is 1xDVD5 with xtool.

Compression time: ~4 hours (4 cores)
Extract time: 30 minutes
final size: 3.96GB
tested with origin version

without redist
without __Installer folder

but should fit with redist + __Installer folder too

Using diskspan 2 data.bin (Data1 for *.arc, Data2 for rest)

Setup.exe should be updated with CIUv2 U14 (include 7zip x64 + xtool x64)

Tested with arc.ini inside CIU
[External compressor:xprecomp]
header = 0
unpackcmd = xtool.exe d:precomp:t75p - - <stdin> <stdout>

All is fine :)

hasnt been posted to be able to use it ;)
pakrat2k2
20-06-2018, 16:19
I want to get your own script
Thank you very much
https://i95.servimg.com/u/f95/18/15/28/91/110.png

Kaktor posted the exact same thing you've asked for within THIS topic > https://www.fileforums.com/showpost.php?p=470676&postcount=3

that archive has the exact images you've posted so use it & dont ask for this again.

MM32, FIRST & ONLY Warning!!!

Ive gone thru entire forum & deleted all your posts asking for this script to do MAD MAX, its in this topic so
Do NOT make any other topics about this any further.
MM32
21-06-2018, 07:06
Kaktor posted the exact same thing you've asked for within THIS topic > https://www.fileforums.com/showpost.php?p=470676&postcount=3

that archive has the exact images you've posted so use it & dont ask for this again.

MM32, FIRST & ONLY Warning!!!

Ive gone thru entire forum & deleted all your posts asking for this script to do MAD MAX, its in this topic so
Do NOT make any other topics about this any further.

The installation program I have
I need a script for the same program
mausschieber
21-06-2018, 07:43
The installation program I have
I need a script for the same program

The Script you need is Here https://fileforums.com/showpost.php?p=459199&postcount=1
MM32
21-06-2018, 07:55
The Script you need is Here https://fileforums.com/showpost.php?p=459199&postcount=1

The script here does not work with
mxprecomp+srep+lzma:a1:mfbt4:d256m:fb273:mc1000000 000:lc8+diskspan:4448mb:4470mb

I want a script that works with this command
The script here does not work with
mxprecomp+srep+lzma:a1:mfbt4:d256m:fb273:mc1000000 000:lc8+diskspan:4448mb:4470mb