M&S_Kompressor By DLG

[felice2011]

' Masked & Standard Kompressor In Command Line '

http://i63.tinypic.com/2wdrfw5.png

' Structured Utility To Compile In A Simple And Intuitive Way Command Lines On The Method Of Single And Masked Compression In FreeArc Console Version '
***
' Personalized Configuration Of The Options With The Choice Of Compression Basic Profiles In Command Line '
***
' Possibility Of Inclusion Of The Password With Coded Extraction '
***
' Possibility To Choose The Target Path Of The Temporary Files ( Self-Elimination At The End Of The Application ) '
***
' Possibility To Optimize The Compression Threshold, With A Choice Of 22 Different Algorithms, In An Infinite Combination '
***
' Possibility To Choose 7 Levels Of Pre-Configured Compression In Increasing Order For The Less Experienced, So As To Facilitate The Selection Of The Algorithms For A Better Choice Of Compression '
***
' Standard Compression Method By Adding Compression Algorithms Only To The Command Line ( /$method= )
***
' Compression With Masked Method By Adding The Algorithms Chosen To The Different Command Lines ( Mask I - Mask II - Mask III ) '
***
' Free Writing On The Change Of Name Of The Masks For A Possibility Of Future Updates '
***
' Full Support Of All Precomp Versions '
***
' Possibility To Save The Configuration Of The Personal Profile Of The Combined Compression, With Quick Loading Of The Last Saved Configuration '
***
' Visual Inspection Of The Algorithm In Use During The Compression Phase '
***
' A Special Thanks Goes To My Friend " Panker " For His Passion And Talent In Data Compression, But Especially For The Support And Creation Of Multi-Masks '
***
' New MSK In ( Developer Version v1.2 ) '
***
' Improve The Control And Insertion Of Algorithms In The List, In The Command Lines '
***
' Plus The Possibility To Save And Customize Preset Configurations In Default, Have Been Added Other 7 User-Config Fully Customizable '
***
' We Have Complete Freedom To Writing, And Manual Entry Of Any Algorithm In The Command Lines, Also Not Presents In The List '
***
' We Have At Your Hand The Directory (Bin) Of Work, Where You Can Delete, Add, Edit, Existing Or New Algorithms '
***
' Added The Option Of Editing And Saving In A Simple And Fast Way The File (arc.ini) Configuration Directly Through The User Interface '
***
' Added Control CPU Resources (Family, N°Cores, Bus Speed, Used System), Free Physical Ram & Used Physical Ram....During All Process '
***
' New MSK In ( Developer Version v1.3 ) '
***
' Added Archive Splitting, With The Choice Of Unit Sizes In Megabytes And Gigabytes...

With Manual Control Of The Threshold Percentage Of Compression In Output '
( Percentage Of Higher Threshold Requires More Disk Space, By Decreasing The Size Of the Archive In Output )
***
' Restored The Console Window On The General Information Of The Compression...

In Case Of Errors Is Set To Pause With Reading The Code Of The Algorithm Error In Running '
***
' Detailed Information About The Input And Output Data In Single-Archive And Multi-Archive...

With Self-Calculation In Real Time Of The Compression Ratio Of The Archives...

Info Of Number And Names Of Archives Created With Size In Input And Output...

With Partial Calculation During Compression, And Total At Compression Finish '
***
' Other Minor Fixes '
***
13834

***
( M&S_Kompressor Update 1 v1.3 )
***
' Added Debug Option For Control Error Code In Console Window Also In The Mode Multi-Archive '
***
( M&S_Kompressor Update 2 v1.4 )
***
' New Method Of Split The Archives, Decreased By 90% The Time Of Scanning And Split Of The Input Data Folder '
( Removed The Use Of Temporary Folders For The Creation Of The Splitted Archives, Avoiding Additional Hard Disk Space )
***
' Added New Option For Creating Self-Extracting Archives ( SFX FreeArc ) With A Choice Of 13 Different Pre-Set Methods '
***
' Increased Control And Stability For Proper Compression In Output Of Methods : Standard, Masked, Multi-Archive & SFX-Archive '
***
' Updated Compressor ( zpaq & zpaq64 Latest Stable Version 7.07 ) '
***
' Added PC Shutdown Option, To Work Completed Successfully ( Function Not Available In The "Debug Mode" ) '
***
( Update v1.4 : Extract The Contents Of Archive, Copy And Replace The Files In The Installation Directory "...\M&S_Kompressor_1.X" )

***
14025

;)

( The Algorithms In The List Have Been Tested And Selected On The Basis To A Criterion Of Best Compression Results )

Note: For Correct Operation It Is Recommended To Disable The Antivirus, Possibility False Positives In The Algorithms.

[rinaldo]

I do not know what I would give to have you in the delta created by razor ... your ideas and designe razor, would be how to compress her pussy with her lips instead of files .. continue so :);)

[panker1992]

Nice felice :D

let's see how this Tool will fare, the only thing i want it to do is take inputs carefully so, masks really work !!!

i hope that you analyzed completely the Readme i gave you :D and i do hope that you will also like and honor whatever future tools i decide to implement

Edit: ( Mask I - Mask II - Mask III - Mask IV ) ~~~~~> correction here :P

[Razor12911]

awesome design dude, got a couple of suggestions from the picture though. Why don't you merge srep and srep64 but make the program detect architecture then decide which one to use (you still find people who will tick srep and srep64 at the same time), the password button could be renamed to generate unless if the button is for something else.

[felice2011]

Edit: ( Mask I - Mask II - Mask III - Mask IV ) ~~~~~> correction here :P

The 4 masks, compiled or not, does not influence the compression method that you choose.
They can be left blank, so as to obtain a standard method, or compile them for method masked.
The fourth mask has been added for your future update, I'm sure that will succeed your compression masked by the use of 4 masks.;)
Otherwise I will have downgrade the product, but I already know that there will be no need.:rolleyes:

[panker1992]

You know that because you know where i am from :P

i am never going to stop unless i see success, since you are italian you know how i work :)

i have put many hours of work to make sure that everything is going as intented, and i am sorry to tell you that i will be doubling them for progress

i am doing Pareto diagrams on some Variables, to make decomp speed double :)

[felice2011]

{ Added First Version (1.1) Enjoy }

[Lucas65]

Thank you Felice!
Ottimo lavoro!

[rinaldo]

bravo

[TheRePacker]

Bro, you should fix the input field. there it is only shown for the desktop area, not for the whole computer and the same thing with the Temp folder also, and bro you should give permission to add fields by ourself also, but very nice work!

[felice2011]

Bro, you should fix the input field. there it is only shown for the desktop area, not for the whole computer and the same thing with the Temp folder also, and bro you should give permission to add fields by ourself also, but very nice work!

It was chosen the desktop browser because is level the starting to reach all system directories in way faster with less folders steps.;)
"Ability to insert and writing new algorithms in the fields" useless permit for you users, all 20 algorithms are embedded in the source code, manually write a new algorithm called "Pippo+" would only lead to the error of the program, because not find...in the compression phase the algorithm with the name "Pippo+";)

[panker1992]

Italians i guess, it's been a while since i came to Italy :P

next time i am around i will teach you ;)

[felice2011]

' New MSK In Developer Version v1.2 '
***
' Improve The Control And Insertion Of Algorithms In The List, In The Command Lines '
***
' Plus The Possibility To Save And Customize Preset Configurations In Default, Have Been Added Other 7 User-Config Fully Customizable '
***
' We Have Complete Freedom To Writing, And Manual Entry Of Any Algorithm In The Command Lines, Also Not Presents In The List '
***
' We Have At Your Hand The Directory (Bin) Of Work, Where You Can Delete, Add, Edit, Existing Or New Algorithms '
***
' Added The Option Of Editing And Saving In A Simple And Fast Way The File (arc.ini) Configuration Directly Through The User Interface '
***
' Added Control CPU Resources (Family, N°Cores, Bus Speed, Used System), Free Physical Ram & Used Physical Ram....During All Process '
***
' Other Minor Fixes '
***
( The Algorithms In The List Have Been Tested And Selected On The Basis To A Criterion Of Best Compression Results )
***
{ As Signature I Always Try To Perfect As Much As Possible...Thanks }

:)

In Dwn..On The Front Page

[TheRePacker]

it can be more great if we can enable/disable PackJPG!

[felice2011]

it can be more great if we can enable/disable PackJPG!

Yes you can make insert or not in graphic interface the recompression jpg;)

[Joe Forster/STA]

(English only, please.)

[felice2011]

Wow Joe Forster, you're worse of the police post you did cleaning in all threads.:D
You could have more understanding and notify before, we would have done the English translation of the answers.:rolleyes:

[felice2011]

how to using it?

you can use it as you see fit, just need a minimum basic on the algorithms utilized.

[felice2011]

in temp, just point
In output, you have to give an extension to the file
Click compile
Click start

ps: on the front page, the photo also shows the example

[felice2011]

That's why I did not want post the developer version..:rolleyes:

In Output you have to give a name and extension to the file....
(Advanced Setup Creator) what the hell is, a folder, a file, an alien ????

Also use the buttons to load and edit (Browse, Restore, Remove) do not manually edit the command line if you are inexperienced.

http://i67.tinypic.com/1j8ejb.png

[1234567890123]

http://i.hizliresim.com/yLbq70.jpg in 1.1 there isn't error but 1.2 i got this error

[felice2011]

Make sure you have the latest framework..
I think that the error is given to the control hardware added in version 1.2..
Furthermore I do not read the error message in that language, make an English translation..

[1234567890123]

in windows 10 there is already latest framework
http://i.hizliresim.com/vnON8z.jpg
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.InvalidOperationException: Cannot load Counter Name data because an invalid index '' was read from the registry.
at System.Diagnostics.PerformanceCounterLib.GetString Table(Boolean isHelp)
at System.Diagnostics.PerformanceCounterLib.get_NameT able()
at System.Diagnostics.PerformanceCounterLib.get_Categ oryTable()
at System.Diagnostics.PerformanceCounterLib.CounterEx ists(String category, String counter, Boolean& categoryExists)
at System.Diagnostics.PerformanceCounterLib.CounterEx ists(String machine, String category, String counter)
at System.Diagnostics.PerformanceCounter.InitializeIm pl()
at System.Diagnostics.PerformanceCounter.Initialize()
at System.Diagnostics.PerformanceCounter.NextSample()
at System.Diagnostics.PerformanceCounter.NextValue()
at M_S_Kompressor.Masked_Kompressor.Timer_Tick(Object sender, EventArgs e)
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndPr oc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.6.106.0 built by: NETFXREL2STAGE
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
M&S_Kompressor
Assembly Version: 1.2.0.0
Win32 Version: 1.2.0.0
CodeBase: file:///G:/Repack_Rip/Compression/M%26S_Kompressor_1.2/M%26S_Kompressor.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 10.0.0.0
Win32 Version: 14.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.6.93.0 built by: NETFXREL2STAGE
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
Accessibility
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
MetroFramework
Assembly Version: 1.3.0.0
Win32 Version: 1.3.0.0
CodeBase: file:///G:/Repack_Rip/Compression/M%26S_Kompressor_1.2/MetroFramework.DLL
----------------------------------------
System.Management
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Management/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Management.dll
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Xml.Linq
Assembly Version: 4.0.0.0
Win32 Version: 4.6.79.0 built by: NETFXREL2
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml.Linq/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.Linq.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.


SOLVED

1) Start CMD.exe as administrator

2) Execute console commands:

C:\Windows\system32>lodctr /R (press enter)

C:\Windows\system32>cd .. (press enter)

C:\Windows>cd syswow64 (press enter)

C:\Windows\SysWOW64>lodctr /R (press enter)

3) ENJOY AND THANK TO felice2011

[ramazan19833]

HI HELP M&S_Kompressor_1.2 ( Pre-Reflate)-Algorithms process in half stays

http://i.hizliresim.com/0mYrA8.jpg (http://hizliresim.com/0mYrA8)
Pre-Reflate
http://i.hizliresim.com/orbN79.jpg (http://hizliresim.com/orbN79)
Algorithms
http://i.hizliresim.com/7Ml1AL.png (http://hizliresim.com/7Ml1AL)


Felice2011 PLEASE HELP PLEASE I'm waiting..

[felice2011]

@1234567890123 ....you have the counter performance messed up try:rolleyes:


1) Start CMD.exe as administrator

2) Execute console commands:

C:\Windows\system32>lodctr /R (press enter)

C:\Windows\system32>cd .. (press enter)

C:\Windows>cd syswow64 (press enter)

C:\Windows\SysWOW64>lodctr /R (press enter)

3) ENJOY and TRY.


@ramazan19833 even if you have written as big as a house, I do not understand your question.

[ramazan19833]

Pre-Reflate ERROR

[felice2011]

Pre-Reflate ERROR

Try only (precomp+msc+reflate+srep64+delta+exe2+nz) do not use masks and it uses precomp038 :)

[ramazan19833]

Try only (precomp+msc+reflate+srep64+delta+exe2+nz) do not use masks and it uses precomp038

STILL ERROR

[ramazan19833]

precomp+msc+reflate+srep64+delta+exe2+nz
ERROR
http://i.hizliresim.com/BDqQ6Q.jpg (http://hizliresim.com/BDqQ6Q)

[felice2011]

Creates a .bat file (with final pause command) enter it in the "Bin_Kompressor" folder and starts the compression using the same method, in the dos window read the error you get.

[ramazan19833]

Creates a .bat file (with final pause command) enter it in the "Bin_Kompressor" folder and starts the compression using the same method, in the dos window read the error you get.

bat file PREPARATION HELP

[felice2011]

Creates a .bat file (with final pause command) enter it in the "Bin_Kompressor" folder and starts the compression using the same method, in the dos window read the error you get.

bat file PREPARATION HELP

@echo off
color 0c
echo.
arc a -ma9 -ds -lc1024 -ld1024 -ep1 -di -i2 -ed -r -hp -p"Your_Password" -w"C:\Temp" "C:\Setup\Data.bin" -mprecomp+msc+reflate+srep64+delta+exe2+nz "C:\Program Files (x86)\Steam\*"
echo.
pause


Copy and Paste the code into a text file and save it in name.bat
Insert the file.bat in "Bin_Kompressor" folder and starts the compression.;)

[ramazan19833]

http://i.hizliresim.com/5MP7MD.jpg (http://hizliresim.com/5MP7MD)

please help

[felice2011]

The error is in the reflate algorithm, can not compress some files in the folder resulting in this error.
You may want to use other methods without reflate, to complete the compression.
I can not do other , I can not know what types of files you have in that folder, and because it generates the error.
P.S:if you want to try again using only this: (reflate+srep64+lzma:max), to take away a curiosity.:rolleyes:

[Pulcione86]

Segnalo dei bug...

A volte se comprimo una cartella di 3 gb va bene, se comprimo una cartella da 500 mb o da 2 gb da errore.. Non so se sia dipeso dalla grandezza dei file da comprimere o proprio dal tipo di file..

Ad esempio ho riscontrato problemi nel comprimere video, e nessun problema degli audio...

---------------------------------------------

I report bugs ...

Sometimes if you compress a 3 gb directory is fine , if you compress a 500 MB folder or 2 GB by mistake .. I do not know if it depended on the size of files to compress or just the type of file ..

For example, I found problems in compressing video , and no problem of audio ...

[felice2011]

Cerca di mostrare sempre metodi mascherati o singoli che si utilizza, quelli con gli errori, e quelli senza errori.
Hai detto che comprime 3GB e funziona, comprimere 2 GB o 500 MB e va in errore, presumo che la dimensione della cartella non compromette la compressione (logicamente utilizzando sempre lo stesso metodo).
Credo che sia l'uso di qualche algoritmo che durante la compressione può generare errori su alcuni file.
Escluderei un bug del programma, nulla a che vedere con l'uso degli algoritmi su cartelle e files selezionati per la compressione.;)

Always show masked or single methods that you use, those with errors, and those without error.
You said you compress 3GB and it works, compress 2gb or 500mb and fails, I assume that the folder size does not compromise a correct compression (always using the same method).
I think it both the use of some algorithm that during compression goes in error on some file.
I exclude a bug of the program, anything to do with the use of the algorithms of folders and files selected for compression.;)

[rinaldo]

buffer buffer
no it handles them if small .. because they work for a certain type of file .. many algorithms excluded FreeArc, nanozip etc. which are universal

[felice2011]

Come si fa ad aiutare una persona con un errore generale durante una compressione, se non ti dice che tipo di algoritmo metodo o maschere usa.
Inoltre penso che dovrò ripristinare la finestra console, in modo che quando genera l'errore si fermi in pausa e si possa visualizzare il codice errore.

How can you help a person with a general error if does not tell you what kind of algorithm, method or masks used.
I also think that I will restore the console window, so that when it generates the error is still paused and you can display the error code.

[Pulcione86]

Hai ragione felice, ma non da nessun codice di errore, segnala solo error...
E lo fa con quasi tutti gli algoritmi con determinati file, quindi anche spiegarti e darti più info diventa difficile...

You happy right, but not by any error code , only reports error ...
And it does so with almost all algorithms with certain files , so even explain and give you more information becomes difficult ...

[felice2011]

OK posto la versione non ufficiale v1.3 con il ripristino della finestra console, in caso di errori va in pausa con la lettura del codice e algoritmo in errore.
(Logicamente è scontato che usi l'utility con antivirus disattivato)

OK I post the unofficial version v1.3 with the console window restore, in case of errors is set to pause with the reading of the code and algorithm error.

update soon

[ChronoCross]

OK posto la versione non ufficiale v1.3 con il ripristino della finestra console, in caso di errori va in pausa con la lettura del codice e algoritmo in errore.
(Logicamente è scontato che usi l'utility con antivirus disattivato)

OK I post the unofficial version v1.3 with the console window restore, in case of errors is set to pause with the reading of the code and algorithm error.

13711

the pause option is very useful.

[rinaldo]

vai cosi cumpaa..
go so appear .. will become a landmark :)

[felice2011]

' NEW MSK v1.3 '
***
' Added Archive Splitting, With The Choice Of Unit Sizes In Megabytes And Gigabytes...

With Manual Control Of The Threshold Percentage Of Compression In Output '
( Percentage Of Higher Threshold Requires More Disk Space, By Decreasing The Size Of the Archive In Output )
***
' Restored The Console Window On The General Information Of The Compression...

In Case Of Errors Is Set To Pause With Reading The Code Of The Algorithm Error In Running '
***
' Detailed Information About The Input And Output Data In Single-Archive And Multi-Archive...

With Self-Calculation In Real Time Of The Compression Ratio Of The Archives...

Info Of Number And Names Of Archives Created With Size In Input And Output...

With Partial Calculation During Compression, And Total At Compression Finish '
***
' Other Minor Fixes '

In The Last Version I Tried To Perfect As Possible, To Make It Complete For The Everyone's Needs.

' Added Update On The Front Page Only Executable '


' Added Debug Option For Control Error Code In Console Window Also In The Mode Multi-Archive '

;)

"Sorry Guys, The Perfection Is An Unattainable Goal"

:D

[Shaer]

Please help !!

http://s25.postimg.org/4ile4emsf/Screen_Hunter_08_Mar_03_16_38.jpg (http://postimage.org/)
img host (http://postimage.org/)

[RamiroCruzo]

Please help !!

http://s25.postimg.org/4ile4emsf/Screen_Hunter_08_Mar_03_16_38.jpg (http://postimage.org/)
img host (http://postimage.org/)

Update your Net Framework hermano....

[kenzo34]

hi, I have Version 4.6 framework the latest update installed
and I have the same error on win 10 x64

[felice2011]

Try Guys..:)

http://www.fileforums.com/showpost.php?p=447129&postcount=25

[poker2332]

Hello and thank you very much for this tool ... I have only one question to ask, how I can decompress files created with this tool ?.
Use the option Pre-Brute (precom+msc+srep64+delta+exe2+fp8) but can not find a script that can decompress, try using the script Razor12911 (Windows Phone Installer v3.1) but does not work

[felice2011]

Hello and thank you very much for this tool ... I have only one question to ask, how I can decompress files created with this tool ?.
Use the option Pre-Brute (precom+msc+srep64+delta+exe2+fp8) but can not find a script that can decompress, try using the script Razor12911 (Windows Phone Installer v3.1) but does not work

Copy and Replace "fp8.exe" located in folder "Bin Kompressor" of MSK, in the folder "Resources" of the installer "WPI3.1".

Edit the INI files and replace with these lines the external comp. fp8

[External compressor:fp8]
unpackcmd = fp8 -d $$arcpackedfile$$.tmp.fp8
datafile = $$arcdatafile$$.tmp
packedfile = $$arcpackedfile$$.tmp.fp8


Add the missing lines in the script as in the picture:

http://i63.tinypic.com/qowy0h.png

http://i67.tinypic.com/2n7fat5.png

If you still have problems with the "WPI 3.1" installer you may need to contact Razor.;)

[ramazan19833]

:confused:HELP
http://i.hizliresim.com/y547b0.jpg

[felice2011]

Updates the last reflate by Razor inside the folder "Bin_Kompressor" of the MSK.
Add "-s2000m" the first line /$options: " -ma9 -ds -lc1024 -ld1024 -ep1 -di -i2 -ed -r -s2000m " and try again..;)

[ramazan19833]

:eek:HELP
http://i.hizliresim.com/0nDPE9.jpg

[felice2011]

As strange error, I hope you have not tinkered too much inside the folder "Bin_Kompressor"...:rolleyes:
Or you can reflate error directly on the specific file, but I can not try because I not have the same files.
Test v1.4 copy and replace inside the working directory.

v1.4 in the works soon in down.

[ramazan19833]

:eek:help.....
http://i.hizliresim.com/LAQ79b.jpg

[Pulcione86]

:eek:HELP
http://i.hizliresim.com/0nDPE9.jpg

The same error also to me

[felice2011]

Take away a curiosity @ramazan19833 and @Pulcione, but using any other method will not reflate, the compression works is successful?
Also let me a screen inside the folder "Bin_Kompressor".

P.S: @ramazan19833 activates the debug mode to display the error code.

[ramazan19833]

:confused:arc.ini

header = 0
packcmd = 7z a -txz -an -mcrc=0 -m1=lzma2:d900m:fb=273:mf=bt4:mc=1000000:lc=4:lp=0 -mmt=2 -mx9 -si -so <stdin> <stdout>
unpackcmd = dec x -txz -an -y -si -so <stdin> <stdout>

[External compressor:xz]
header = 0
packcmd = 7z a -txz -an -mcrc=0 -m1=lzma2:d450m:fb=273:mf=bt4:mc=1000000:lc=4:lp=0 -mmt=4 -mx9 -si -so <stdin> <stdout>
unpackcmd = dec x -txz -an -y -si -so <stdin> <stdout>

[External compressor:zstd]
packcmd = zstd -9 $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = zstd -d -f <stdin> <stdout>

[External compressor:msc]
;Alt: c -v -f Forced //-frog=9 use this instead of -tak=9
header = 0
packcmd = msc c -v -wav=1 -raw=1 -bmp=1 -ddsraw=1 -ddsdxt=1 -mp3=1 -bmf=9s -tak=9 -dxt=1 -lzma=hc4,lc8,lp2,pb2,fb273,mc1000 $$arcdatafile$$.tmp $$arcpackedfile$$.tmp

[External compressor:reflate]
header = 0
packcmd = reflate -process $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = reflate -restore $$arcpackedfile$$.tmp $$arcdatafile$$.tmp

[External compressor:rep,lzma,4x4,delta,exe]

header = 0

packcmd = fazip -i0 compress:{compressor}{:option} <stdin> <stdout>

unpackcmd = fazip -i0 decompress:{compressor}{:option} <stdin> <stdout>


[External compressor:fp8]
packcmd = fp8 {-option} -8 $$arcpackedfile$$.tmp $$arcdatafile$$.tmp
packedfile = $$arcpackedfile$$.tmp.fp8

[External compressor:zpaq]
;-method s4.3ci1 -method 46,36,26
packcmd = zpaq a $$arcpackedfile$$.tmp $$arcdatafile$$.tmp -method 6 -threads 2 {options}
unpackcmd = zpaq x $$arcpackedfile$$.tmp $$arcdatafile$$.tmp -summary
datafile = $$arcdatafile$$.tmp
packedfile = $$arcpackedfile$$.tmp

[External compressor:zpaq64]
;-method s4.3ci1 -method 46,36,26
packcmd = zpaq64 a $$arcpackedfile$$.tmp $$arcdatafile$$.tmp -method 6 -threads 2 {options}
unpackcmd = zpaq64 x $$arcpackedfile$$.tmp $$arcdatafile$$.tmp -summary
datafile = $$arcdatafile$$.tmp
packedfile = $$arcpackedfile$$.tmp

[External compressor:lzham]
packcmd = lzham -m4 -d29 c $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = lzham -c d $$arcpackedfile$$.tmp $$arcdatafile$$.tmp

[External compressor:lzt]
;fast = -32 and max = -p1 -49 -b200
packcmd = lzt -p2 -49 -b200 $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = lzt -d $$arcpackedfile$$.tmp $$arcdatafile$$.tmp

[External compressor:nz]
;options -cc=best -m3g=memory -nm
packcmd = nz a -r -v -cc -m3g -br128m -bw128m -p2 -t0 -nm $$arcpackedfile$$.tmp.nz $$arcdatafile$$.tmp
unpackcmd = nz x -m1g -t0 -p0 $$arcpackedfile$$.tmp.nz $$arcdatafile$$.tmp
datafile = $$arcdatafile$$.tmp
packedfile = $$arcpackedfile$$.tmp.nz

[External compressor:nz64]
;header = 0 -cc = CM algo -cO=BWT algo ;testing = nz:r:v:cc:m8g:br512m:bw512m:p4:t0:nm
packcmd = nz64 a -r -v -cc -m8g -br512m -bw512m -p4 -t0 -nm $$arcpackedfile$$.tmp.nz $$arcdatafile$$.tmp
unpackcmd = nz64 x -m1g -t0 -p0 $$arcpackedfile$$.tmp.nz $$arcdatafile$$.tmp
datafile = $$arcdatafile$$.tmp
packedfile = $$arcpackedfile$$.tmp.nz


:confused:Bin_Kompressor

http://i.hizliresim.com/ljEzAp.jpg (http://hizliresim.com/ljEzAp)

[felice2011]

OK you've tried without using reflate if compression is successful ?

[ramazan19833]

:confused:Bin_Kompressor Data
:cool:http://s3.dosya.tc/server8/36eczy/Bin_Kompressor.rar.html

[felice2011]

:confused:Bin_Kompressor Data
:cool:http://s3.dosya.tc/server8/36eczy/Bin_Kompressor.rar.html

But you do not write, you have small hands short, only post pictures and smiles help..:D
I repeat...you've tried without using reflate if compression is successful ?
Do this test is at least answer a yes or a no.;)
Anyway "Chasing Dead" in down to test the compression using reflate.:rolleyes:

[ramazan19833]

What do I need help
Bin_Kompressor

[felice2011]

:confused:Bin_Kompressor Data
:cool:http://s3.dosya.tc/server8/36eczy/Bin_Kompressor.rar.html

What do I need help
Bin_Kompressor

This is what happens to me with the "Bin_Kompressor.rar" files you've posted...:eek:

http://i68.tinypic.com/2vc7zoz.png

I would like to know what the heck are you doing with the folder "Bin Kompressor" the files you eat them for breakfast?:confused::confused::eek::eek:

Remove the * .DLL "cls-reflate.dll" that has nothing to do in the folder "Bin_Kompressor"

[dixen]

http://f3.s.qip.ru/adNBVHDv.png
Version 1.2 OK, version 1.3 - that error

[felice2011]

http://f3.s.qip.ru/adNBVHDv.png
Version 1.2 OK, version 1.3 - that error

Update .Net Or Try doing a cleanse like this:


1) Start CMD.exe as administrator

2) Execute console commands:

C:\Windows\system32>lodctr /R (press enter)

C:\Windows\system32>cd .. (press enter)

C:\Windows>cd syswow64 (press enter)

C:\Windows\SysWOW64>lodctr /R (press enter)

3) ENJOY and TRY.

[ramazan19833]

Error: Unable to rebuild performance counter setting from system backup store, error code is 5

[felice2011]

To users @ramazan19833 and @Pulcione, the "Reflate" compression system still suffers from error caused to compression of input data folders larger than 2GB.
We recommend the split of input data Lower to 2 GB for a correct final compression.

Test Executed with "Chasing Dead Game" (Method Used reflate+lzma) :

Step1 Splited Data 4000 MB With Error:

http://i68.tinypic.com/v5lc0l.png

Step1, Step2 etc... Splited Data 1770 MB No Errors

http://i65.tinypic.com/19t9aq.png

http://i68.tinypic.com/2d9zekx.png

ETC...

In addition MSK is tested on all Windows platforms, "NO Win XP" problems to error program, may be caused by an unstable proprietary system, with genaral errors due to the updates or Errors in the ".Net Framework" , or tampering with files inside the folder "Bin_Kompressor".

The topic in question can also be closed.:)

[Pulcione86]

http://s17.postimg.org/xjjtd2qm3/ssddss.jpg (http://postimg.org/image/xjjtd2qm3/)

[dixen]

Update .Net Or Try doing a cleanse like this:


1) Start CMD.exe as administrator

2) Execute console commands:

C:\Windows\system32>lodctr /R (press enter)

C:\Windows\system32>cd .. (press enter)

C:\Windows>cd syswow64 (press enter)

C:\Windows\SysWOW64>lodctr /R (press enter)

3) ENJOY and TRY.
Thanks but i use Windows 10 x64...Your advice did not help.

[felice2011]

http://s17.postimg.org/xjjtd2qm3/ssddss.jpg (http://postimg.org/image/xjjtd2qm3/)

Pulcione l'errore riscontrato è sempre su Reflate. L'MSK e un utility di compressione tutto in uno, che usa gli algoritmi in lista per creare metodi di compressione.
Consiglio di rivolgersi a Razor per errori riguardanti il sistema reflate, è in questo caso l'errore comune e generico "general (DE)compression error in reflate"
Io non posso fare altro, non ho il codice sorgente reflate per risolvere i vari problemi.;)

Pulcione the error returned is always on reflate. The MSK and a compression utility all in one, which uses algorithms in the list for creating compression methods.
Recommend contacting Razor for errors relating to reflate, in this case the common and generic error "general (DE) compression error in reflate"
I can not do anything else, I do not reflate the source code to fix the various problems.;)

[felice2011]

@dixen...I do not understand Russian, or do not know what language it is, but the error "E: \ System Volume Information" tells you access denied ?
Also try using the system directory which normally should be "C:\*" both in Input that Output.

[dixen]

@dixen...I do not understand Russian, or do not know what language it is, but the error "E: \ System Volume Information" tells you access denied ?
Also try using the system directory which normally should be "C:\*" both in Input that Output.

Thanks.. I try one more time..

[ramazan19833]

:confused:help.....

:eek:http://i.hizliresim.com/OAEN83.jpg (http://hizliresim.com/OAEN83)

[felice2011]

:confused:help.....

:eek:http://i.hizliresim.com/OAEN83.jpg (http://hizliresim.com/OAEN83)

http://i65.tinypic.com/2hzlno.png

I have so much patience, but with you guys the my patience saturates quickly..:cool:

[kenzo34]

http://f3.s.qip.ru/adNBVHDv.png
Version 1.2 OK, version 1.3 - that error

hello if it helps
I had this error I solved update win 10x64 to 15.12 Version
since works perfectly

[poker2332]

I did what you recommended and this is what happened.
Any idea what I can do?
http://i1312.photobucket.com/albums/t533/Skynet1929/Sin%20tiacutetulo_zpsdxaq0ciu.jpg

[felice2011]

I did what you recommended and this is what happened.
Any idea what I can do?
http://i1312.photobucket.com/albums/t533/Skynet1929/Sin%20tiacutetulo_zpsdxaq0ciu.jpg

Try to decompress the compressed archive with this..
13978
Set the "precomp" version used, start the extraction is wait a few minutes, the "FP8" decompression is a little bit slower.:)
Let me know if extraction is successful..:rolleyes:

This morning day free..:D

Alternatively I tested the WPI 2.5 repack by Panker and designed by Razor, modified for use of the compressor "FP8".;)
The method used is as follows "precomp+msc+srep64+delta+exe2+fp8", archive name "data1.bin" Precomp version used "0.42"
Installer tested and working, no problem found, I hope I did something pleasant have fun..:D
13980

[poker2332]

Thanks for answering, this is what happens when you use the "WPI 2.5 repack by Panker and designed by Razor"
http://i1312.photobucket.com/albums/t533/Skynet1929/Sin%20tiacutetulo_zpsgcmmpgx6.jpg

Thus it is how compressed files is

http://i1312.photobucket.com/albums/t533/Skynet1929/Sin%20tiacutetulo2_zpsvssxvrpy.jpg

P/D: This program is the only one that works.
http://i1312.photobucket.com/albums/t533/Skynet1929/Sin%20tiacutetulo2_zpstb4uny6e.jpg

[felice2011]

@poker2332...Deluxe Extractor works with all types of algorithms and methods, is a universal extractor, so let's say that grinds everything..;)

Commit to study the installer's code, add the algorithms that interest you, as in the first example I gave you a few pages back, you will succeed alone.:)
In a sense, post the prepared food I'm not never liked, is at the disadvantage of those who want to learn something seriously.
By Samantha..;)

[felice2011]

( M&S_Kompressor Update 2 v1.4 )
***
' Change Log In First Page '
***
Note : ' For A Successful Upgrade To The New Version 1.4 we Recommend You Uninstall The Previous Version, To Reinstall The 1.3 Version,
And Add Only The Update v1.4 Always On The Front Page '

:)

[poker2332]

I have one more question to do
As I can a different extension ".BIN" in the "WPI_v3" installer.
Generally I usually put my repacks Setup.something in the installer WPI_v3 I can not use a custom extencion as simpre says "not the .bin file is"

[felice2011]

Change the extension to line "Archive1Source={src}\data1*" save all, recompile and try again installation.

[Amsal]

Why, shouldn't you add cls-precomp all in one by razor here in the next update, or if u have problem then u can even give choice that if someone wants to use previous CLS then they can and if someone wants to use new one then they can use new one by razor!

[kenzo34]

Hello felice2011 how to settle this problem?
on input there's only desktop

[felice2011]

Click 2x and opens the tree view with all folders and subfolders of your pc.

[kenzo34]

Click 2x and opens the tree view with all folders and subfolders of your pc.

I can not click the icon is fixed, when I click it nothing happens.
if I enter the path manually in input this does not result in errors?
I love this compressor and I very much try to make it work.
sorry bother you all I really try everything before asking for help
thank's

[felice2011]

hello if it helps
I had this error I solved update win 10x64 to 15.12 Version
since works perfectly

Strangely here you seem that you all works, the app has also been tested on win10, and it works smoothly, do not understand why some of you from problems, but now I have no time to investigate.:)

This morning I made some quick updates, as well as several updates compared to version 1.4, I added the drag and drop to the input boxes (Temp, Input & Output)

1) *Manual entry of the path.

2) *Drag & drop of the path folder and file.

3) *Loading patch via Browse, changed the root from which to explore, (My Computer) ... (Only Input)

*(The application reads in real-time the existence of folders & files, size, number files, file name, file format)

14502

[kenzo34]

you are awesome Felice2011
it works perfectly with this update.
thank you for reactivity.now I can finally use this fantastic compressor
thank you very much

[ramazan19833]

Split_Kompress_v1.3d
ASC or ISDone Support (unpack) HELP
M&S_Kompressor_1.3

[gozarck]

Hey felice2011 are you ok? About the earthquake.

[felice2011]

Hey felice2011 are you ok? About the earthquake.

Thanks Gozarck, here we all ok in central-southern Italy, the earthquake has hit central Italy wreaking havoc of the beautiful places, with the collapse of unique architectural monuments in Italy, as well as the dead and wounded, I have no words to express the pain of the poor people, the nature does not look at anyone and always rages with those not guilty of anything.

[gozarck]

Thanks god felice are you ok. I see the news and the horror people alive in the ground the childs and the old people. Really so sad.

[RamiroCruzo]

Good to hear everyone's safe and sound...No one can control force of nature, the more you try to do so, the more it proves ya wrong...So, start green lives ;)

[isakhauge]

Hi! I'm currently repacking a game of mine, but I would very much like a readme/manual for the fantastic M&S Kompressor. Like, what's $void and $msrsolid mask? And how do I use it?

- I couldn't find any link to the readme.

[felice2011]

The masks are different filters that are applied to the data compression, all the compressed files are selected from the setting inside the "arc.groups" files.

The extension of the unrecognized filter is packed with the main method, the recognized filter that starts with the $ sign compresses all the files with the chosen method following.

Exampless...

(/$text= srep+zstd) This will compress all text files separately and then put inside the archive.

$text
file_id.diz
descript.ion
files.bbs
read.me
readme
readme.*
*.
*.txt
*.asc
*.lng
*.css
*.dtd
*.dtdxml
*.htm
*.html
*.shtml
*.xml
*.xsl
*.xsd
*.docbook
Etc....


($void=msc+srep64+zstd) For the list of non-compressible files, excluding the compression method the files that do not get any compression ratio.

$void
*.bnk
*.usm
*.bik
*.bk2
*.flv
*.f4v
*.avi
*.wmv
*.mov
*.vob
*.3gp
*.asf
*.mp4
*.m4v
*.mpg
*.mkv


(/$deflate=pzlib...lz77) Filter and compresses all files with the extensions groups, and then put the package in the archive.

$deflate
*.cpk
*.dat
*.upk
*.cas
*.rpf
*.pdf
*.swf
*.zip
*.jar
*.png
*.gif
*.gz
*.tgz
*.svgz
*.sis
*.gadget
*.fb2z
Etc....