FEAR 1.03 patch

[madman59]

New patch no longer works with DT4. Any ideas?

[Joe Forster/STA]

Perhaps, you should be much more patient. (Also, read forum rule #6. I'm not sure if it applies to your question.)

[madman59]

My post wasn't so much as a request for a patch but sharing the news with the community, I can still use my original disk. I've been using a mini-image from gamecopyworld for some time with success but after installing the 1.3 patch, wich just came out with punkbuster support, I get an emulation program detected error message.

[Anti669]

Try using SR7Stop - available on GCW.

[Dr_Kina]

I just installed the 1.03 update and had the same problems iv downloaded SR7stop but it doesnt seem to work when i put it in the FEAR folder. can someone explain to me how to do that? or has SR7stop worked for anyone with this problem?

[Anti669]

Did you actually run sr7stop, or just place it in the game folder?

[m4gicfour]

I'll install the patch tomorrow, and use pr0t.st0p and see whats up. If anyone can come up with some other alternate workarounds (keep in mind my ide device controller is already disabled, don't bother mentioning that) in case it doesn't work, that'd be great. Then I can post the results and what works/doesn't.

--Edit--
I was bored, so I did it right away (since xfire had already downloaded the patch anyway) and... it cranks out the "emulation software detected" message. Using pr0t.st0p 1.0 with Daemonscript 1.6.0 and DT4. Nforce3 MOBO's PATA controller is disabled in device manager. This setup worked pre-1.03 to get rid of "disk not found or authenticated" and "Please insert disk in another drive" messages. Any ideas guys?

[maylat]

use CureROM 1.3.1 to avoid blacklist here is the link
http://rapidshare.de/files/13536322/CureROM_131_Setup.rar.html

[m4gicfour]

I hate cureROM... Oh well, I'll bite the bullet and try it out.
EDIT: Doesn't work. - Then again, I'm using a mini-image, curerom doesn't claim to work with them. I'll find a maxi.
EDIT: Nope, that didn't work either. Keep getting the "emulation software detected" message.

[XtremeX]

lmao

[Ogimos]

First I have a legal copy, I use the NoDVD 1.02 Crack on 1.03 update, containing the files below,and this works.

FEARE_2.arch00
FEAR.exe
EngineServer.dll

Works fine for me, don't ask me to send these files,and can't remember where i've got these Nodvd Crack 1.02 from,i slighty remember it was an Russian site , F.e.a.r displays Version 1.03 after installing these files.

But honestly i cant notice any difference in game play on Single player aswell in Multi player, even when i play the original without the noDVD Patch.
I re installed the entire game.
Maybe U can search for this NoDVD Patch, but's what the hurry insert your retail DVD and play.

Additional:

O after looking in GCW i found the 1.02 NoDVD patch
F.E.A.R. v1.02 [ENGLISH] No-CD/No-DVD/Private Server Fixed EXE

It wasn't so far away LOL

[Nilhanth]

Cool, so it's official then? The v1.02 noDVD crack works with the v1.03 patch? :)

[m4gicfour]

Hmm... my game crashes when I use the 1.02 NOCD/DVD patch... But I've still got a few ideas up my sleeve...

[kotsüppchen]

for me this tool works fine

http://rapidshare.de/files/11451206/securom_loader.rar.html

mount the Image with DT 4.03, the start the AntiSECURom.exe and select the FEAR.exe ... the game should start!

[m4gicfour]

Thanks, I'll give it a try.
CONFIRMED. This works with DT 4.03, Mini-Image and Fear Patch V1.03
Do you know what the commandline parameters are (can it be scripted)?

[Bamarama]

I made backup copies of my disks, but they won't work.

5th disk not being original and all.
Will any of these methods work for this?

I make backups because I have a 6 year old, and he finds that cd's/dvd's make good frisbees..lol

[Grumpy]

We will need a little more information on this comment: "5th disk not being original and all". What exactly do you mean!

Of course when you create a backup then the backups are not original?

How did you copy them? What program did you use? What settings did you use?

Read the FAQ to see how to submit a question. ;)

[Bamarama]

ok, sorry. i used clone cd to copy the disks. all 5 of them.

but when i try to use disk 5(copy) to authenticate, when i load the game, it says it can't, and it isn't original disk.

as far as the settings, i used the defaults i suppose. i have never changed them to copy anything.

basically, if something happened to my disk5, i would be in a jam, because i wouldn't be able to use the copy.

hope this helps

[robo989]

CloneCD will not backup recent games (last 2 years or so) even if your writer\reader is capable of doing the protections

for securom 7 you will need blindwrite 4.2x

for safedisk u will need alcohol 120% usin sd2\3 profile

disk will need to be put in a reader only for securom and either for sd4

since your FEAR is a CD version you should be able to do it in alcohol 120%

[Muji-FightR]

I regret to tell you you're wrong with one of your thoughts.
CloneCD is able to create backups of SafeDisc games, as well as Alcohol 120 ;)

[robo989]

I meant from about safedisk 2.5 onwards - about 3 years.

If it does newer than 2.5 then I had no idea and please forgive my misinforming :o

[Jedimaster Player]

I own the DVD version of Fear
I only have the Update v1.1 installed & quite happy to leave it at that meaning I hear & see no problems with FEAR & a NO DVD Crack is working fine so basically its pointless in Updating unless you have problems...

[Muji-FightR]

Youre not playing online, arent you ?
Otherwise you would probably use the advantage of Punkbuster, introduced with Patch 1.03 ;)

[Jedimaster Player]

I would like to Play Online, but its just not Fast enough my Connection Speed that is as I run ISDN 128k, I have tried it but when Some action happens then it slows right down to almost 1 & a half second response time.

But Playing the single Player I cannot complain, its so much fun & to top it off I like the smart comments that the AI has to say in different situations.

If you dont have this Game "FEAR" its recommended you buy it if you can run it as its Fantastic my Opinion of course & proberly others as well, Doom 3 I think is Scary but Fear is Freaky & Nurving & can actually make you jump away from the screen at times, Especially if your to Close...
:) :eek:

[epps14]

....i cant get any of those methods to work and it is getting me p-o-ed!
can someone just release the no cd crack already....:mad:

[AndyMutz]

FEAR 1.03 works fine for me with the mini image mounted in DT4 and FEAR started with securom loader.
curerom works for me too, but when i quit curerom my windows gets very unstable and my network gets screwed up.
sr7.stop, prot.stop and securom 7 burner loader don't work for me. FEAR crashes when i try to start it with these tools.

-andy-

[epps14]

[QUOTE=AndyMutz]FEAR 1.03 works fine for me with the mini image


WICH MINI IMAGE DO YOU USE!!!

[AndyMutz]

WICH MINI IMAGE DO YOU USE!!!

F.E.A.R. Director's Cut v1.02 [ENGLISH] No-DVD/Fixed Image by pYRo

-andy-

[epps14]

instead of downloading an image...i just made my own with alcohol....i have the cd version...i used the option thats like "SecuRom *NEW [4.x,5.x]"....but it still dont work!...how do i get it to work??!!:(

[Joe Forster/STA]

Read the FAQ (and linked guides) for more infos on how to create images.

[Hustler]

I've already tried all of the above suggestions and I can honestly say that none of them work at all..... We need a proper 1.03 fixed exe file...

[epps14]

I agree...this is getting ridiculas for me to have to take my brothers cd's to play...

[MontyBurns1985]

There has been released a NO-DVD Fixed Exe for Patch 1.03!!!
Don't know which group has made it, probably RELOADED, I assume.

I've found the crack on "that other site"! :rolleyes:
So it is only a thing of time, until it will be available @ GCW!
The crack works, hopefully.

[Muji-FightR]

So it is only a thing of time, until it will be available @ GCW!
Just for future reference:
It's a matter of time ;)
I'm not trying to be rude, mate :) Just wanna help you

[AndyMutz]

the crack is from ABSENTiA and as far as i can tell it works fine, at least for singleplayer.

-andy-

[epps14]

didn't work for me:mad: ...i run the game and then the process runs for like 5 seconds then ends itself....:mad:

[sylvio]

I have the original boxed F.E.A.R. DVD and I uses a Mini-Image Mounted
with DTools v4.03 + Daemon ANTISECUROM v1.0. The game works 100%
without the original DVD.

[Joe Forster/STA]

@epps14: You should try without the crack; perhaps, that crashes, too? Read the FAQ on some ideas.

[epps14]

no crashing at'all when i use the original cd 5 mate...the crack just dont work for me...

[Grumpy]

Ive just been using the 1.03 NoCD and it works fine.
I did a fresh install of the game, only cause I didnt have it installed, then installed the v1.03 update, then swapped the exe's, then played.
No problems. ;)

[Del Paso]

The crack works fine for me up until I try to play multiplayer then I get an error message saying "cannot download FEARE_2.arch00". Can anyone help or just enlighten me as to why this is? I seem to have that file in my F.E.A.R directory so I can't figure out why it needs to try to download it!

[Grumpy]

@Del Paso
99% of NoCD cracks do not work for online play!
Use the original disc or a mounted mini/maxi/full image to play online.

[Del Paso]

Ah, fair enough! This is the first time I've come across a game not working online but thanks for your help. Guess I'll just have to keep reaching for the dvd! Cheers.

[ikkyu]

Well, i bought fear a while a ago then, when i started to want to play without the cd (i got too many games :p) i used CureRom Pro. And it still working perfectly today, with version 1.3.1, even online and hopefully coz im playing on multiplayer mode mainly.

[rlsuth]

I'm happy to say that it works for me too. Great game as well!