August 26, 2005
MX4 Production Issue.
Notice to our customers:
Around 360 MX4 of the last batch have been produced with a capacitor on the RST line instead of a resistor due to a component
roll exchange on the production machine.
This issue will prevent the MX4 from booting at all.
If you are facing problem with your MX4 chip first of all check this picture to see if you have one of these 360 problematic pieces.
http://www.infinitymod.com/matrix/uploads/MX4ErrorSmall.JPG (http://www.infinitymod.com/matrix/uploads/MX4Error.JPG)
The issue is easily solvable by replacing the mistaked component with a standard 33KOhm SMD resistor.
Or, in case you only have normal resistors, by using THIS (http://www.infinitymod.com/matrix/uploads/MX4Res.GIF) diagram.
Just contact our assistance team at:
[email protected] (
[email protected]) to get full support and assistance to solve the problem.
Once again sorry to all our customers for this error.
Taken from www.infinitymod.com/matrix (http://www.infinitymod.com/matrix)
Just something to look out for there... :eek: