View Full Version : I Hate my PS2
kenafein
15-11-2004, 17:29
I have been having a lot of trouble reading backup media (Taiyo Yuden etc), well I ordered HD loader and it finally came. I installed the hard drive and then tried to boot from the disk, it didnt work. I then proceeded to try booting my original Katamari disk and that didn't work. I retried about 5 times and it finally booted up. Do you think my laser needs to be cleaned? Or do I just need a new PS2?
I have the no solder modchip installed, so there are no soldering issues.
I personally would try cleaning the laser then adjust the laser if that doesn't work. What version is it anyways?
TylerDurden
15-11-2004, 17:58
Ill take it if you dont want it.
Tyler!
spedmetal
15-11-2004, 18:07
What version is your PS2?
kenafein
15-11-2004, 20:31
GAH, I ran over and got a laser cleaning kit, but the PS2 won't even let me run that. It is a SCPH-3001 so V4.
spedmetal
15-11-2004, 21:16
V4 PS2's are notorious for laser issues! You may need to have the laser cleaned and or adjusted.
kenafein
15-11-2004, 21:53
Well it finally went through the cleaning process and HDloader now works (Not my backups though). Does anyone know if HDloader works for multiple disk games?
H|LLJD00
16-11-2004, 05:15
Your using cheap media. Backup ONLY to Ritek G04 Dye DVD's.
Also, no solder modchip :mad: their not very good to be honest, e.g. swap tricks, you will ruining your laser fast with this method.
Same with bad media, ruins your laser.
V4 PS2's are notorious for laser issues! You may need to have the laser cleaned and or adjusted.
I found that out the hard way...i was getting DRE all the time until i opened it up and gave the whole thing a clean, using and Automatic/Electric Wheel Pump with the shell of a cheep ball pen (biro) to blow away the dust from the case.
And for the laser i had used a cotton bud and gently cleaned it...i had no need to move the white cog..or i think i might have just not a significant amount.
i can read any original disc, yet no backups whatsoever (using Ritek Ridata g04) also it doesn't read backed up DVD-R movies, but i don't care i got a v10 for my back-ups and a dvd player for my movies. I'll be giving it a HD so hopefully it will be able to play it straight from there.
Your using cheap media. Backup ONLY to Ritek G04 Dye DVD's.
Also, no solder modchip :mad: their not very good to be honest, e.g. swap tricks, you will ruining your laser fast with this method.
Same with bad media, ruins your laser.
He's using Taiyo Yuden dvd-r's so i dont think media is the problem. Its a old PS2 that didnt have a very good laser even when it was new lol. I would sell it and get newer model to use the HD on. Like a v7 thru v10 :)
Your using cheap media. Backup ONLY to Ritek G04 Dye DVD's.
Also, no solder modchip :mad: their not very good to be honest, e.g. swap tricks, you will ruining your laser fast with this method.
Same with bad media, ruins your laser.
Swap tricks don't ruin the laser at all bud, if u do the "knife trick" it'l ruin your drive mechanism. Others such as the nosolder modchip doesn't do anything apart from eject ur drive!
spedmetal
16-11-2004, 17:17
Others such as the nosolder modchip doesn't do anything apart from eject ur drive!
Wrong
No solders put a lot of strain on the electronics in the PS2, I have even seen them blow out fuses in a few PS2's first hand.
vBulletin® v3.8.11, Copyright ©2000-2026, vBulletin Solutions Inc.