DVD newbie question

[plyah8a]

Is there any to staight copy a DVD with a burner, and be able to play it on PS2? When I say straight, I mean using an ISO image and possibly patching it. Not ripping it and changing files. I have made several attempts to copy, all have failed. I have the Gameshark. I would like to know, so I can take this DVD burner back if I do not need it.

[Charlie]

The below instructions are from www.ps2ownz.com
To create your working DVD-R back-ups, you may wish to use PrimoDVD software which is made by Prassi. In addition, a Pioneer DVR-A03 or comparable DVD burner is recommended! For step-by-step PS2 DVD-R burning instructions click HERE.


--------------------------------------------------------------------------------

HOW TO "DOUBLE SWAP" AN ORIGINAL PS2 DVD WITH YOUR DVD-R BACK-UP:

Procedure: This method requires you to use an original PS2 ORIGINAL DVD and also AR2 v1.7 CD:
1) Turn on the ps2 with GS2 v1.9 / AR2 v1.7 (holding down the ON/RESET).

2) Select Start Game (Still Holding ON/Reset).

3) Press EJECT (while still holding the ON/RESET button) and swap GS2 v1.9 / AR2 v1.7 with PS2 ORIGINAL DVD.

4) Press EJECT to close (Wait 10 seconds).

5) Then select WITHOUT CODES. Wait until disc stops.

6) Now let go of reset and the tray comes out, swap PS2 ORIGINAL DVD for a back-up DVD-R and press X just as the tray starts to go back in (IMPORTANT)!

NOTE: An 8-wire mod-chip is REQUIRED to do this (using it's "tray opener" function described above) and also please be aware that the DVD ORIGINAL DVD MUST have a bigger TOC than your back-up DVD-R!

[plyah8a]

Thanks, I got the trick to work on Silent Hill2 but it did not work on Devil May Cry. It loaded all the way to the Capcom screen and then went blank. How can I check the TOC? Also, how can I adjust the size?