Plextor 16x Locks Up Computer When Burning CD Image

[Armed and DWI]

Problem: I cannot write disk images ( .bin / .cue , .iso , etc. ) to CD anymore using my Plextor 16/10/40A CD-RW. About 5%-8% into writing ANY disk image to CD , the writing process ceases and sometimes the computer locks up shortly after this. At this time, the Plextor drive appears to be spinning continuous until I reboot. At the time the writing ceases, the Nero Burning Rom software log monitor reads : SCSE/IDE command aborted .

I have tried this using other software too like CDRWIN 3.9c . CDRWIN reports this error message :
http://67.83.26.59:98/armed_and_dwi/plextor.gif
CDRWIN also generates this log file (http://67.83.26.59:98/armed_and_dwi/ASPI.LOG).

I am running Windows XP Professional on an ASUS A7N8X Deluxe motherboard with all the latest drivers and motherboard BIOS.

I have tried switching the Plextor drive from Slave to Master and the result is the same.

Note that writing an Audio CD or a plain Data File CD works absolutely fine , no problems whatsoever.

Also note that when I simulate the writing of a disk image , it completes sucessfully.

UPDATE 2003.04.25: Problem solved. I used different drivers for my motherboard. Previously I had been using version 2.03 drivers provided on the motherboard's chipset maker's website ( NViDIA ). So I tried instead to use drivers supplied by the motherboard's physical manufacturer ( ASUS ) instead. That did the trick. Thanks for the sugguestions anyway

[gh0sth@cker]

Have you tried different software - try making an image using Alcohol 120% so you can narrow it down to either hardware or software problem

[Armed and DWI]

Originally posted by gh0sth@cker
Have you tried different software - try making an image using Alcohol 120% so you can narrow it down to either hardware or software problem

I just tried using a new program called CDRWIN. Again, it was unable to write the image file. Unlike Nero however, the computer does not hang - it just gives me this error dialog:

http://67.83.26.59:98/armed_and_dwi/plextor.gif

CDRWIN also generated this ASPI log file: http://67.83.26.59:98/armed_and_dwi/ASPI.LOG

[gh0sth@cker]

Have you tried updating your ASPI layer
http://www.adaptec.com/worldwide/support/driverdetail.html?sess=no&filekey=aspi32.exe

[Armed and DWI]

Originally posted by gh0sth@cker
Have you tried updating your ASPI layer
http://www.adaptec.com/worldwide/support/driverdetail.html?sess=no&filekey=aspi32.exe

That link says that it is not meant for Windows XP, and also it is pretty old (1999). Also note that in the past I was indeed able to write disk images.

Using CDRWIN, I have tried both "Use ASPI drivers already installed on system" and "Use ASPI drivers that come with CDRWIN." Same result for both of them.

I have also tried things like writing the CD at a slower speed, but the same result.

Strangely, when I do a simulation for a disc image, the simulation suceeds...

[bighap]

That cdrwin looks kinda weird. Are you using cdrwin 5? Is so trash it. It is garbage.

[Armed and DWI]

Originally posted by bighap
That cdrwin looks kinda weird. Are you using cdrwin 5? Is so trash it. It is garbage.

It's 3.9c - the latest version available on their official website.

I am going to try putting my drive in someone else's computer.