Pioneer 105

[Chris174]

Right should have this tomoz.

What i want to know is what jumper settings should i have it set on?

I currently have my Hard Drive on IDE and a CD Writer on IDE.

I do not really want to get rid of my CD Writer so can i slave the Pioneer off the CD Writer?
If i can and it will work fine what jumper settings will it need to be set on?

Thanks

[bighap]

Your Pioneer should be set to master. You can try putting it as a slave but you might run into problems.

[Chris174]

What problems could i run into?

Could i do it the other way round then?
Put the CD Writer on the slave and the Pioneer on the master?

Would i still run into problems then?

[bighap]

Software might not recognize your drive or you will come up with errors. Setting you cd writer as a slave and your Pioneer as the master should work great. That is how I am set up.

[Chris174]

Ok i think i'll do it that way.

So if i set my CD Writer on Slave and my DVD Writer on Master and then plug them in and turn on the PC it should just see them both?

[bighap]

Yep.

[Stiffler]

I set my 105 as SLAVE. Been burning for quite a while with no problems.

Either setting should suffice.

[Chris174]

Well it's installed now. And working fine.
Just my PS2 has that stupid Neo chip which won't play back up dvd-r's so i need to buy a new ps2 yet

[Stiffler]

Dude,

You don't need to buy a new PS2. Just buy a Magic3(cheaper) or Messiah2 and try to install it yourself. Not confident? THen get a professional to do it. Either way, it's still cheaper than buying a new system.

Just my 2-cents.

[Chris174]

The laser will be crap mate, the Neo 2.2 breaks the laser so i will put a new chip in it and i will end up going buying a new drive for the ps2 or something.