PDA

View Full Version : Wheelman dvd9 to 2xdvd5

FREEMAN100
27-03-2009, 01:12
WHEELMAN DVD9 TO 2XDVD5

Copy the contents of the DVD9 to a new folder..Move folder Disk7 to Disk12 to somewhere else & make ISO from 1st folder..Make a new ISO with the remaining Disk folders..Disk7 to Disk12

You get a StringID_NoDisk2 error when it gets to the end of ISO 1...clicking ok just follows on to the next ISO..
ravd
27-03-2009, 10:46
Wheelman DVD9 to 2xDVD5 multi5 (error fixed)

1) Copy DVD content to 'Wheelman' folder

2) Download wheelman_dvd9_to_2xdvd5.7z (http://fileforums.com/attachment.php?attachmentid=917&stc=1&d=1238187053%22) and extract it to 'Wheelman\Disk1' folder

3) Run 01_editlayout.bat in 'Wheelman\Disk1' folder

4) Run 02_replace_files.bat (wait until it finishes)

5) Run 03_clean_up.bat

6) Delete 'Disk3' - 'Disk12' folders

7) Move data3.cab from 'Disk1' to 'Disk2' folder, replace when asked

8) Move 'Disk2' folder to SAFE place (somewhere else than Wheelman folder)

9) Burn or make image from 'Wheelman' folder with label Wheelman_1

10) Delete 'Disk1' folder and move 'Disk2 folder back to 'Wheelman' folder

OPTIONAL: Edit autorun.inf and change OPEN=AUTORUN.exe to OPEN=0 for DVD2 (Might be necessary for XP users, but i have never had problems leaving it like it is on Vista and Win7)

11) Burn or make image from 'Wheelman' folder with label Wheelman_2

NOTES: Please insert disk is in English for all languages (Please insert disk 2 that contains the file data3.cab.), optionally change it to what you want by opening IPS file for your language in notepad and change text after ID_DISC2= before running 02_replace_files.bat

TEST using images before burning to disk

1. Do NOT use UltraISO Virtual Drive to test images, it has problems with recognizing Disk 2. Use Daemon Tools (http://www.daemon-tools.cc) or SlySoft Virtual CloneDrive (http://www.slysoft.com/en/virtual-clonedrive.html)
2. UNMOUNT Disk 1 before you MOUNT Disk 2
dkmiami
27-03-2009, 13:16
the conversion works fine .. after you updated the files..... :D thank you "ravd" for all your efort
canibus2677
27-03-2009, 13:43
Yes now the conversion work flawlessly!!
Thanks a lot RAVD!!! You Are the MAN!! :D
Also a awesome game!!! worth it!!
senseman
28-03-2009, 01:45
freeman method
works
thanks
sanad i
29-03-2009, 09:11
Thank u ravd its works
Zantetsuken
30-03-2009, 08:44
ravd's conversion works fine; installed without issues at all.
laohacvaconvac
30-03-2009, 09:50
Thank ravd!
I conversion about 1h, Install and Uninstall good
Maxgrilo
30-03-2009, 19:23
the conversion 100% works, thank you ravd...
zg39
30-03-2009, 20:29
thx ravd!! works great!!:D
pakrat2k2
31-03-2009, 10:23
Looks like some kind of issue with 64bit systems.. works fine on 32 bit but not on 64 bit systems. When it asks for next disk that contains data3.cab, and that dvd is inserted ( which worked fine on XP 32 bit ) it says that it cannot find the path for /Disk2 which contains the data3.cab file.


Error Saying it cannot read from write protected media. Remember these ISO's worked perfectly on 32bit system.
pakrat2k2
31-03-2009, 11:51
apparently it works ONLY with burnt media.. it still says cannt find data3.cab, but clicking ok IT CONTINUES. weird ?!?!
ravd
31-03-2009, 12:08
Well i just can't preproduce those kind disk2 problems, regardless how i mess with installation.

Installs fine in Win7 64bit, from Images, HDD, dvd2 has only Disk2 folder etc.

@Pakrat2k2, are you sure you are getting error message with "can't find data3.cab" or normal dvd2 request "Please insert disk 2 that contains the file data3.cab."

EDIT: Also have people with problems tested conversion by FREEMAN100 and did you have Disk2 problems or not with it?

EDIT2: Pakrat2k2, try installing so that you UNMOUNT DVD1 before MOUNTING DVD2, this is how i have always tested my images, just like you would eject tray before changing burned disk and this also might be the cause of disk problems for others. i just tried installing without unmounting and got "can't find" error but install continued normally after pressing ok.
ravd
01-04-2009, 10:04
Please, post more precise info

1. Used images, burned to disk, from hdd?
2. What OS?
3. What image emulation software you used?
4. If you used images then did you unmount Disk1 before mounting Disk2?
5. Did install continue when pressing OK?
6. Does it happen with FREEMAN100 conversion?

I can't help anyone without any info.
khronosbr
01-04-2009, 10:16
Please, post more precise info

1. Used images, burned to disk, from hdd?
2. What OS?
3. What image emulation software you used?
4. If you used images then did you unmount Disk1 before mounting Disk2?
5. Did install continue when pressing OK?
6. Does it happen with FREEMAN100 conversion?

I can't help anyone without any info.

Hi RAVD.

1. Used Images
2. Vista 32bits
3. Virtual Drive UltraIso
4. unmount Disk1 before mounting Disk2.
5. does not continue the installation when I press OK.
6. not used the method of FREEMAN100
yener90
01-04-2009, 10:18
thx ravd its working perfect on vista 32bit.

@khronosbr
try to create the image with nero 8.
ravd
01-04-2009, 10:25
Also people with problems, check you didn't make any mistakes in conversion

and check that correct data3.cab 3,05GB (Which was created in Disk1 folder when running 02_replace_files.bat) is in Disk2 folder in DVD2

X:\Disk2\Data3.cab

EDIT: I'll test UltraISO, if its problem with it and also creating images with different file system

This is how i made my images. I used ImgBurn and images where made using File System: ISO9660 + Joliet + UDF, for testing those images i used SlySofts Virtual CloneDrive

EDIT2: @khronosbr and Armoured, It's UltraISO's VirtualDrive problem and i get pakrat2k2's problem about Write protection when i try to browse/select Disk2 folder on DVD2

So fix for all not recognizing Disk2 problems is to use Daemon Tools or SlySofts Virtual CloneDrive ( <- I suggest this if using Win7, Daemon Tools doesn't work on it yet)
ravd
01-04-2009, 11:52
I added this info in conversion notes.

TEST using images before burning to disk

1. Do NOT use UltraISO Virtual Drive to test images, it has problems with recognizing Disk 2. Use Daemon Tools or SlySoft Virtual CloneDrive
2. UNMOUNT Disk 1 before you MOUNT Disk 2

I think all users with disk2 problems are using UltraISO Virtual Drive
Megalith
02-05-2009, 08:16
Thanks ravd, works fine!
lonerunner
20-05-2009, 06:24
win7 32bit ravd conversion works fine.Using ultraiso to extract disk, and to create new disks. mounted in daemon tool and installed. Thanks!!!
The-revenge
26-05-2009, 11:15
sorry it works for italian version? (multi)

EDIT : sorry ravd but this is a conversion complete or a RIP? because in the folder 3-12 wich I delete there are a file of 650 mb in the folder 3-11, and there are a file of 110 mb in folder n 12.
Thanks.
ravd
27-05-2009, 08:51
sorry it works for italian version? (multi)

EDIT : sorry ravd but this is a conversion complete or a RIP? because in the folder 3-12 wich I delete there are a file of 650 mb in the folder 3-11, and there are a file of 110 mb in folder n 12.
Thanks.

it's not an rip, files in folders 3-12 are repackaged into data2.cab and data3.cab to Disk1 folder so those folders are unnecessary after doing conversion.

Any idea for multi 3 vesion this game (CZ-HU-PL) ?

Conversion is for multi5, for other versions here is manual steps to do so. (This is for advanced users, maybe someone wants to write conversion for other versions based on this)

get iscab, use iscab in my conversion for example

1) make list.txt with command

ISCAB data1.cab -lx -i"list.txt"notice -lx instead just -l, this will list ALL files, most importantly IPS files

2) Extract IPS files only

3) Edit IPS files with notepad and add

ID_DISC2=Please insert disk 2 that contains the file data3.cab.

This would give window with title "Setup Needs The Next Disk"
and text in window "Please insert disk 2 that contains the file data3.cab."
without error

Instead with window with label "Setup Needs The Next Disk"
and text in window "ID_DISC2"
and error before that

4) Run add and replace command to add modified IPS files back to cabs
ISCAB.exe data1.cab -a -i"list.txt"
kamil145
18-06-2009, 11:53
Conversion is for multi5, for other versions here is manual steps to do so. (This is for advanced users, maybe someone wants to write conversion for other versions based on this)

get iscab, use iscab in my conversion for example

1) make list.txt with command

ISCAB data1.cab -lx -i"list.txt"notice -lx instead just -l, this will list ALL files, most importantly IPS files

2) Extract IPS files only

3) Edit IPS files with notepad and add

ID_DISC2=Please insert disk 2 that contains the file data3.cab.

This would give window with title "Setup Needs The Next Disk"
and text in window "Please insert disk 2 that contains the file data3.cab."
without error

Instead with window with label "Setup Needs The Next Disk"
and text in window "ID_DISC2"
and error before that

4) Run add and replace command to add modified IPS files back to cabs
ISCAB.exe data1.cab -a -i"list.txt"
Conversion for multi3 works:)
Thanks.
Assur
04-07-2009, 06:25
Wheelman DVD9 to 2xDVD5 multi5 (error fixed)



Modified wheelman_dvd9_to_2xdvd5.7z for multi3 (Czech - Polish - Hungarian)
version this game :
sumant30
04-08-2009, 05:33
Thanks ravd works Fine!!!! both install & uinstall :D .Also tested on win 7 x86 created the isos using power iso and mounted using daemon tools all is working very smooth thanks again and cheers!!!!.