THE WITCHER (DVD9 to 2X DVD5's)

[FREEMAN100]

It says "Please insert disk5 that contains the file Data6.cab"...whats wrong with that...You could always rebuild a new installer from scratch using Installshield or something like it if you want it to be all "Prim & Proper"...

THE WITCHER DVD9 to 2X DVD5 backup

Copy the contents of the DVD9 to a folder called THE WITCHER Then move the following files from that folder onto the desktop...

Data6.cab, Data7.cab, Data8.cab

Burn with the volume label THE WITCHER....

To make DVD 2 just use the 3 data.cab files along with the icon file & the autorun.ini...also include the folders..DocsENG, DocsFRA, DocsGER, DocsITA, DocsSPA, Directx..edit the autorun to look like this...

[AutoRun]

open=0
label=The Witcher
icon=witcher.ico

Burn with the same volume label as the first DVD.....Im sure most of you have already done this but just incase you havent figured it out here it is....& of course you will need to wait for a FIX to be released before burning these to DVD5's

[mondragon]

I tried....I dont have the time to spend on each file...if somone else has to time to get them down to 100Megs each so that they can be used for the conversion that would be good.....

Yes Intro.BIK = 2k
Outro.BIK= 2k
rewrite this conversion to any available lang :)

Filename: list_spa
Filetype: .txt
Filesize: 10 KB
http://uploaded.to/?id=2mnp3f

eng list
http://uploaded.to/?id=g5wozw

Filename: witcher_multi_to_italy_only
Filetype: .rar
Filesize: 1 KB
http://uploaded.to/?id=cm380e

Filename: list_ger_fix
Filetype: .rar
Filesize: 1 KB
http://uploaded.to/?id=ime29b

available lang from setup.ini

[Languages]
Default=0x0009 english default
count=5
key0=0x0009
key1=0x040c
key2=0x0007
key3=0x0010
key4=0x000a

0x0009 = English
0x040c = French
0x0007 = German
0x0010 = Italian
0x000a = Spanish

[prepucij]

Please tell me is this conversion OK:

Copy the contents of the DVD9 to a folder called THE WITCHER Then move the following files from that folder onto the desktop...

Data6.cab, Data7.cab, Data8.cab

Burn with the volume label THE WITCHER....

To make DVD 2 just use the 3 data.cab files along with the icon file & the autorun.ini...also include the folders..DocsENG, DocsFRA, DocsGER, DocsITA, DocsSPA, Directx..edit the autorun to look like this...

[AutoRun]

open=0
label=The Witcher
icon=witcher.ico

Burn with the same volume label as the first DVD.....Im sure most of you have already done this but just incase you havent figured it out here it is....& of course you will need to wait for a FIX to be released before burning these to DVD5's

[mondragon]

It says "Please insert disk5 that contains the file Data6.cab"...whats wrong with that...You could always rebuild a new installer from scratch using Installshield or something like it if you want it to be all "Prim & Proper"...

THE WITCHER DVD9 to 2X DVD5 backup

Copy the contents of the DVD9 to a folder called THE WITCHER Then move the following files from that folder onto the desktop...

Data6.cab, Data7.cab, Data8.cab

Burn with the volume label THE WITCHER....

To make DVD 2 just use the 3 data.cab files along with the icon file & the autorun.ini...also include the folders..DocsENG, DocsFRA, DocsGER, DocsITA, DocsSPA, Directx..edit the autorun to look like this...

[AutoRun]

open=0
label=The Witcher
icon=witcher.ico

Burn with the same volume label as the first DVD.....Im sure most of you have already done this but just incase you havent figured it out here it is....& of course you will need to wait for a FIX to be released before burning these to DVD5's

and these 3 files on dvd2
vcredist_x86.exe
TagesSetup.exe
TagesSetup_x64.exe
must be :)

[rafaelmiglio]

and these 3 files on dvd2
vcredist_x86.exe
TagesSetup.exe
TagesSetup_x64.exe
must be :)

Nice!! Tested and works 100%!! :D

[mondragon]

second method fastest
THE WITCHER MULTI DVD9 TO 2xDVD5 [working with both releases [multi 5 lang / multi 2 lang]

volumelabel not important i used "thewitcher" for both dvd's
dvd1 contents for multi 5lang and multi 2 lang

System\ [folder]
layout.bin
data1.cab
data2.cab
data3.cab
data4.cab
data5.cab
_Setup.dll
ISSetup.dll
Autorun.exe
setup.exe
data1.hdr
witcher.ico
autorun.inf
setup.ini
setup.inx
release.txt

dvd2 for both releases:

dvd2 contents for multi 5lang

directx\
DocsSPA\
DocsGER\
DocsITA\
DocsENG\
DocsFRA\
data6.cab
data7.cab
data8.cab
TagesSetup.exe
TagesSetup_x64.exe
vcredist_x86.exe
witcher.ico
autorun.inf

dvd2 contents for multi 2 lang

directx\
DocsCZE\
DocsPOL\
data6.cab
data7.cab
TagesSetup.exe
TagesSetup_x64.exe
vcredist_x86.exe
witcher.ico
autorun.inf


additional step
edit autorun.inf from dvd2 to look like below:

[AutoRun]
open=0
label=The Witcher
icon=witcher.ico



remeber to check before burning

TESTED ON POL/CZE release of game
dont know if dx need to be on dvd1 or dvd2
dont show window with dx9 setup
but game with this conversion install fine

[Blackeyedboy]

a. dvd1 contents for multi 5lang

b. dvd1 contents for multi 2 lang


Erm... isn't there a typo there? Shouldn't be:

a. dvd2 contents...

and

b. dvd2 contents... ??

:)

[Tuxx]

Thx a lot ! :)

[Jokerme]

Hey, I just want to make a english only dvd5... I made a dvd 5 without data 4 5 6 and 7, so its asking for data 4, what should i do? they were not language files i think :D did i make a mistake?
Edit: also i want it as a single dvd5

[mondragon]

Hey, I just want to make a english only dvd5... I made a dvd 5 without data 4 5 6 and 7, so its asking for data 4, what should i do? they were not language files i think :D did i make a mistake?
Edit: also i want it as a single dvd5

weird question
first post shows what u need to do to fit into one dvd5 in english

[Jokerme]

Dude, it is saying : THE WITCHER DVD9 to 2X DVD5 backup...

I want 1 dvd5. if it is possible of course...

[mondragon]

Dude, it is saying : THE WITCHER DVD9 to 2X DVD5 backup...

I want 1 dvd5. if it is possible of course...
dude :)
http://fileforums.com/showpost.php?p=348445&postcount=2
that i said in conversion to 1xdvd5 where FREEMAN100 delete intro/outro

Grumpy
u do nice mess ... after cleaning

edit
u can try this
http://www.cd-2-dvd.com/modules.php?name=Forums&file=viewtopic&t=864&start=60&sid=841bd3d91a348a7ae34fdfc1f29f64e7
that the biggest conversion :P [include FREEMAN100 dvd5 only]read note

[Jokerme]

thanks dude, sorry about the mess ...

[Grumpy]

Grumpy
u do nice mess ... after cleaning
I can assure you its a lot easier to find info now that the junk has been removed.
Ok I made an error with this particulur conversions topic, but I will fix it right now. ;)

[colenetz]

very nice, thx

[n00b_bi22o]

i've tried mondragons eng only conversion using his list.txt, (i have the multi5 version of the game) and after its done, im stuck with a 9.5 gig folder. which data.cab's can i remove after its done?

[mondragon]

i've tried mondragons eng only conversion using his list.txt, (i have the multi5 version of the game) and after its done, im stuck with a 9.5 gig folder. which data.cab's can i remove after its done?

7.volumelabel for dvd1 and dvd2 = "THE WITCHER"

8. dvd1 contains
all files withou these files/folders: Code:

data3.cab
Directx
all folders DOcs*



9. dvd2 contains Code:

data3.cab
Directx
folder DOcs* [one for specific language]
autorun.ini
witcher.ico
vcredist_x86.exe
TagesSetup.exe
TagesSetup_x64.exe



10. edit autorun.ini from dvd2 to look like below: Code:

[AutoRun]

open=0
label=The Witcher
icon=witcher.ico