ripped sega rally 2 - what now

[mickrick]

Just ripped my first game, sega rally 2, and extracted all the files and converted the raw's to wav's but I'm confused as to what to do next. With the files totalling around 1Gb, I reduced the size of the wav files to around 10 secs each so now the entire disc should only be 400 odd Mb. But how do I burn the disc? According to Dc-cdr I should burn the wav files first and then set the iso offset. How do I do this? Is it the same figure as the start sector of the second ripped iso? Also, how do I patch the 1st_read.bin (boot.bin) when I don't know which file it is. Any help greatly appreciated.

[xena]

TITLE : S**A RALLY2 "Jap"
Game Type: WinCE with CDDA
Tracks: 23
Protection: Yes
Crack: Use Bincon to hack the 0winceos.bin
Use ipbin4win to active "s**a os used" box in ip.bin file
Ripping time: 21 hours
O/S - Windows Settings: Win 95J SE / TTrem / 115200 / hardware
REGION: Jap NTSC
GZIP Size:
track03.iso.gz 56kb
track04.raw.gz 14.1mb
track05.raw.gz 9.43mb
track06.raw.gz 35.7mb
track07.raw.gz 30mb
track08.raw.gz 37.6mb
track09.raw.gz 35.3mb
track10.raw.gz 39mb
track11.raw.gz 36.8mb
track12.raw.gz 42.1mb
track13.raw.gz 35.2mb
track14.raw.gz 27.1mb
track15.raw.gz 34.9mb
track16.raw.gz 30.4mb
track17.raw.gz 0.99mb
track18.raw.gz 3.18mb
track19.raw.gz 9.46mb
track20.raw.gz 9.25mb
track21.raw.gz 28.2mb
track22.raw.gz 15.0kb
track23.iso.gz 284mb start sector=278862

Extract track03.iso track23.iso 278862 ,size 528mb ,22 folder ,798 files
Boot: S**A RALLY2 -Jap - Selfboot "Rip out all CDDA 458mb wav"

[mickrick]

Nah, UK version, 18 tracks, track3.iso 153mb, track4.raw - track20.raw, track21.iso 413mb, 24 hrs to rip. I take it I should use the same method and that the tools are available online?

[mickrick]

Sorry, make that 19 tracks.

[xena]

go.to/selfboot

[mickrick]

There's no mention of it on your site, plus I cannot record cdda tracks with dc-cr. please help.

[emulsoin]

I had this same problem the other day but some one (you know who you are thanx) helped me out... use the echelon self boot meathod...

1. Go to the record disc option ( first button on left )
2. Select Load Tracks
3. Click on the ADD button
4. Add the file called " Audio.raw " This file is found in the selfboot
toolkit software.
5. Click " ok "
6. make sure that the Open new session Box is checked.
7. " Start Recording "
8. After this is done leave the disc in the drive and proceed to the next
set of steps.

ok here is where it gets interesting , so pay close attention as you will
have to use dos for this part.

1. go into dos mode ( after you have done the steps above )
2. go into the selfboot directory ( which you should have after you install
the selfboot toolkit )
3. type in the following " cdrecord -scanbus "
4. This command will list all your cd-rom / cd-recorder drives in the
following format adress then name
5. the adress is shown as 3 numbers seperated by commas example 1,0,0 ,
write down the number for your cd-recorder.
6. Remeber this numbers as you will need it from now on for all games you
will burn in the future.
7. after you have the number do the following " cdrecord -dev=*,*,* -msinfo
(The stars should be replaced with the number for your burner as
mentioned in step 5 )
8. this will give you a number starting with 0,?????? <--- write this down
as well.
9. put all the game info ( the stuff you unzipped from the track03.iso.gz
file ) into a directory called c:\selfboot\data
10. copy the Ip.bin and 1st_read.bin from this new directory into the
selfboot directory
11. delete those two files from the data directory so they should now only
be in the selfboot directory
12. type " Binhack "
13. it is going to ask you for the bootbin file this files is 1st_read.bin
14. it will then ask you for the bootsector this file is the ip.bin
15. then it will as you for the msinfo this is the number from step 8 , only
enter the number after the comma not the zero
16. once this is done , copy only the 1st-read.bin file back to the data
directory leave the ip.bin alone for now.
17. next we make the image by the following command " mkisofs -C
0,??????? -V game name -l -o data.iso data
^step 8
^ whatever you want to call it

18. once this is done , we need to insert the ip.bin into this new file by
doing the following
19. type " ipins "
20. it will ask for bootsector this is the ip.bin file
21. it will ask for iso/image name this is " data.iso "
22. once this is done close your dos mode.
23. go back into cdrwin and choose the following " File backup and tools "
2nd choice from the right.
24. pick the option "record iso9660 image file "
25. go down to image file name and select data.iso in your selfboot
directory
26. make the disc type "CDROM/XA " AND MAKE THE MODE TYPE "MODE2"
27. MAKE SURE THAT ONLY FINALIZE SESSION AND WRITE POSTGAP ARE CHECKED AND
THAT NOTHING ELSE IS CHECKED.
28. Now click start.
29. Once this is done eject disc and try it out. Have fun

If you have any more questions feel free to e-mail me at cable@webspan.net
and I'll try to help if I can.
Let me know how it turns out.

When its in their info its kinda harder because they try to tell various meathods at once...

however im still having a problem... it will not boot! do i need a dummy file or somethin?

[xena]

just burn the gxxedata ,there's no room for cdda and avaiable winceda crack.

[mickrick]

Xena - you mentioned previously about Bincon - I take it that this is what I need to crack the protection on the game? Where do I get it and, more importantly, how do I use it?

[xena]

usage: bincon <0WINCEOS.BIN file> <new 1ST_READ.BIN to create>
example: bincon 0WINCEOS.BIN 1ST_READ.BIN

It does what it says it does. It allows you to run DC WinCE apps with
Utopia's Boot Disc v1.1. I gave the option of naming the file names
just incase someone didn't want them to have the exact names.