DJ2.0 SETTINGS I USE FOR SELFBOOTING DC GAMES

[igottashit666]

i am using a yamaha 8424ez ide drive with windows 98 (se i think)

check these boxes

ignore read errors
raw read/ write
edc/ecc

i turn off burnproof
set max image size to 80 min.

set recording speed slidebar to copy to a temp image first and then burn.

this works for almost all self booting games that i have done.

self booting dc games that gave me problems

samba de amigo usa self boot
plasma sword usa self boot

some games take a little longer to read. with these settings when you get illegal field or no seek errors, it will continue to read, and should burn a working dc game.

some games have no seek errors when reading, i have a feeling that these are the games with the 300 sector problems that some people are mentioning.

when getting no seek errors and you see DJ added some dummy blocks, do not worry. so far i have not had problems when getting these errors with these settings.

now i hope people will stop asking questions on how to set the DJ2.0 settings. but by the next day, some moron will be asking it again.

i hope this helps people.

[igottashit666]

BACK TO THE TOP

[igottashit666]

back to the top for those who don't read past page 1.

[igottashit666]

back to the top for those who don't read past page 1.

[igottashit666]

back to the top for those who are too lazy to read past page 1.

[DCGAMER]

can we use these settings in DJ 3.0 or does it have to be 2.0?

[igottashit666]

never used 3.0

also i DJ is set for write an verify
set it to write only and turn off verify

[igottashit666]

back to the top for those who are too lazy to read past page 1.

[igottashit666]

back to the top for those who are too lazy to read past page 1.

[igottashit666]

back to the top for those who are too lazy to read past page 1.

[igottashit666]

back to the top for those who are too lazy to read past page 1.

[igottashit666]

back to the top for those who are too lazy to read past page 1.

[Mantus]

Thanx.........

Back to top.....

[igottashit666]

back to the top for those who are too lazy to read past page 1.

[igottashit666]

back to the top for those who are too lazy to read past page 1.

[BIG PAPA]

moving on up!!!!

[Llama_Rider]

i am using Plextor 8x4x32
all i do is start up diskjuggler and start buring i have not had one with this burner and i am poud of it. It works really great!!!!!! so all i use are the default settings works really great for me
the only thing i switch is the action setting from write and then verify is to just write


Peace from the Great Llama east!!

[igottashit666]

back to the top for those who are too lazy to read past page 1.

[igottashit666]

back to the top for those who are too lazy to read past page 1.

[igottashit666]

back to the top for those who are too lazy to read past page 1.

[addict]

Your are great help, i think i'm close now but:

you are talking about the edc/ecc setting to turn off. Sorry but i cant find it. Where can I find it. I burned whout this setting and the cd contains then onlu a audio track.

My question : where can I find the edc/ecc setting and there are standard some settings made, should I turn thes off and only the setting on you mentioned.

also tried cdi2nero but after writer my cd-rom player cant find any files on the disk ( empty ), has some had these problems to and do you have a sollution?

Thanks John

[igottashit666]

it was either in your default settings or the advanced options menu.

i only use the settings that i have stated in this post that i set up in my defaults settings menu. so whenever i start up DJ. the settings are automatically set to what i have stated in this post.

everything else that you can set up in the default settings is not checked. i only checked the ones i mentioned in this post.

[Mantus]

TOP TOP TOPÅ TOP TOPÅ TOÅP

[qkpony]

you guys keep up the good work

[mark dc]

i did exactly what u got in here. i tried it on test drive le mans and i get many errors saying edc/ecc inconsistency while it's caching the image from cd....however dj keeps going...so i didnt worry. BUT, when dj tried to put the image to cd, i get the error illegal block parameter and spits out the cd.

used dj2 with mitsumi 4804te

when i used dj3...no errors came out and everything went fine UNTILL i put it on my dc. DC did not read it.

im so pissed...i had 7 coasters so far...no success yet

[igottashit666]

the mitsumi drive will give you lots of problems from what i have read in this and other forums.

this is your best bet

1) cdirip or
2) cdi2nero and burn with nero or
3) get a new burner

if anyone else has a better suggestion, please post it. i am not an expert at this.

[qkpony]

[just keeping you alive]igottashit666 (28-11-2000 19:33):
i am using a yamaha 8424ez ide drive with windows 98 (se i think)

check these boxes

ignore read errors
raw read/ write
edc/ecc

i turn off burnproof
set max image size to 80 min.

set recording speed slidebar to copy to a temp image first and then burn.

this works for almost all self booting games that i have done.

self booting dc games that gave me problems

samba de amigo usa self boot
plasma sword usa self boot

some games take a little longer to read. with these settings when you get illegal field or no seek errors, it will continue to read, and should burn a working dc game.

some games have no seek errors when reading, i have a feeling that these are the games with the 300 sector problems that some people are mentioning.

when getting no seek errors and you see DJ added some dummy blocks, do not worry. so far i have not had problems when getting these errors with these settings.

now i hope people will stop asking questions on how to set the DJ2.0 settings. but by the next day, some moron will be asking it again.

i hope this helps people.[/quote]

[igottashit666]

back to the top for those who are too lazy to read past page 1.

[igottashit666]

back to the top for those who are too lazy to read past page 1.


these settings work for me. they may not work for your burner. i only posted what works for me.

[igottashit666]

back to the top for those who are too lazy to read past page 1.


these settings work for me. they may not work for your burner. i only posted what works for me.

[igottashit666]

back to the top for those who are too lazy to read past page 1.


these settings work for me. they may not work for your burner. i only posted what works for me.

[igottashit666]

back to the top for those who are too lazy to read past page 1.


these settings work for me. they may not work for your burner. i only posted what works for me.

[igottashit666]

back to the top for those who are too lazy to read past page 1

[igottashit666]

BACK TO THE TOP

[igottashit666]

BACK TO THE TOP

[goldenboy]

uppin, thanx 4 the aid

[-=miSaki=-]

hm..thanx for the help.
as for the other stuffs in the advanced page like "Mode1/2/audio type, offset #, truncate/overburn" and other stuffs. i should just leave all to the default right?