007 ripping help

[jsk333]

i am attempting to rip my first dvd game 007 agent under fire, i downloaded a kit off the net, this is what it says to do
-MAKE A DIRECTIRY CALLED BONDAUF IN C: (C:BONDAUF)
2-EXTRACT 007NTSC.ZIP IN C:BONDAUF
3-REMOVE ALL THE READ ONLY OF ALL THE FILES (with attribute.exe)
4-CLICK ON 007.EXE
5-CLICK ON RIP
6-COPY THE .ISO WITH CDRWIN
-click on backup and tools
-select record an iso 9600 image
-select tour file
-cdrom-xa
-mode2
-speed lowest as possible
i did 1-4, and when i click on rip in the 007.exe, i come up with this: "run-time error '53' File not found"
does anybody know what might be causing this or if i am doing anything wrong?
i have a us ps2 v4 modded with a neo 4
thanks

[jsk333]

does anybody know what i should do, or have another rip kit for agent under fire, any ideas, anything. please help.

[jsk333]

can anybody help me out?? at all on rippin agent under fire. please

[mrupset]

is it the PAL or NTSC version if it is the pal one thy the included rip kit, it's the one i used

Regards

Mr Upset

[mrupset]

ok then, that didn't work if it is the pal version let me know and i will mail it to you

regards
mr upset

[jsk333]

its ntsc.
thanks man

[SimonBradley]

What Operating System are U using?

[jsk333]

operating system as in my computer? i was runnin windows 95, now i am have xp, and it still comes up with a runtime error. my playstation is v4 ntsc modded with a neo 4

[monnie]

When you mentioned step 3 (3-REMOVE ALL THE READ ONLY OF ALL THE FILES (with attribute.exe)) You didn't mention using a hex editor & taking out the DVD checks. I'm pretty sure the reason you need to do that step is so that you can use a editor to edit the files then you recheck them back again when your done. Correct me if I'm wrong though. :)

[jsk333]

i used hex editor to change these files
VD checks were found by underagedrinker

First file --- action.elf
hex offset 116bc:[02]000424 change to [01]000424
hex offset 116f4:[02] change to [01]
hex offset 21a820:change 9010 0D0C [0800 848E] FA0E 0D0C change to 9010 0D0C [0100 0424] FA0E 0D0C
hex offset 21B070: change 9010 0D0C [0800 048E] FA0E 0D0C to 9010 0D0C [0100 0424] FA0E 0D0C
Hex offset: 21B094: change 0324 0600 [4350 0100] 1124 A60F to 0324 0600 [0010 0010] 1124 A60F

here is the next file --- driving.elf
Offset: 101488change 1A70 090C [0800 848E] 846E 090C to 1A70 090C [0100 0424] 846E090C
offset: 101CDC:change 1A70 090C [0800048E] 846E 090C
to 1A70 090C [0100 0424] 846E090C
offset: 101CF6: change 0324 0600 [4350 0100] 1124 306F to 0324 0600 [0010 0100] 1124 306F
offset: 1826A0: change 1A70 090C [0200 0424] 0000 0000 to 1A700 90C0[1000424] 0000 0000
offset: 1826DC: change 1A70 090C [0200 0424] 846E 090C to 1A70 090C [0100 0424] 846E 090C
offset: 182710: change 1200 0224 [0700 6214 1400 0224] to 1200 0224 [0000 0000 0000 0000]
offset: 18274C: change 1A70 090C [0800 448C] 1000 BF7B to 1A70 090C [0100 0424] 1000 BF7B

movie.elf
offset: 1CE0: change CCF5 040C [0200 0424] 4C10 040C to CCF5 040C [0100 0424] 4C10 040C
offset: F850: change CCF5 040C [0800 848E] 36F4 040C to CCF5 040C [0100 0424] 36F4 040C
offset: 100A4: change CCF5 040C [0800 848E] 36F4 040C to CCF5 040C [0100 0424] 36F4 040C
offset: 100BF: change 1200 0324 [0600 4350] 0100 1124 to 1200 0324 [0600 0010] 0100 1124

Slus_202.65
offset: 1104: change 8E38 7C0C [0200 0424] 1000 033C to 8E38 7C0C [0100 0424] 1000 033C
offset: 1184: change 8E38 7C0C [0200 0424] 1428 7C0C to 8E38 7C0C [0100 0424] 1428 7C0C


all i should have to do is change the numbers it says right and save it?

[monnie]

Yup, you should be all set after that. Goodluck :)

[jsk333]

it doesnt work i get a runtime error, sayin file not found or something, when i run 007.exe, and click on rip, and i cant get past step 5. so im not set, i dont know what to do

[yannovitch]

where can you find your kit for ripping 007 and the tutorial for rip teh dvd game.
thanks.

e-mail: yannovitch@libertysurf.fr

[monnie]

Yannovich check e-mail. Link sent